linda s Posted November 10, 2013 Share Posted November 10, 2013 Are you looking for the code check connectors? Mine is an 86 and they look just like this. Jump the wires on the circled one on the left. Drivers side fender wall Linda S Quote Link to comment Share on other sites More sharing options...
Gatorbob Posted November 11, 2013 Author Share Posted November 11, 2013 Linda, I actually have 3 of those plugs. a large and small on the fender, and a small with electrical tape on it . Your photo is too small to see which is circled. (after you upload a photo, click "add to post it will just show the attachment code no photo. then "add reply, it will allow readers to expand your photo for a larger view.) Here's my photo. tell me which one if you can. My stall gives me no check engine light. I just want to know how to read codes. Quote Link to comment Share on other sites More sharing options...
WME Posted November 11, 2013 Share Posted November 11, 2013 Its the right hand fender mounted connector with two wires. The rubber ring is just a storage mounting the connector is not connected to anything. Quote Link to comment Share on other sites More sharing options...
waiter Posted November 11, 2013 Share Posted November 11, 2013 GREAT - Looks like yours is a little different, Look thru that book you have and see if there is a test jumper for the fuel pump. The fuel pump jumper (or the ability to turn the fuel pump on and bypass all the control stuff) will save a lot of time in troubleshooting. JOhn Mc 88 Dolphin 4 Auto (For Sale) Quote Link to comment Share on other sites More sharing options...
Gatorbob Posted November 11, 2013 Author Share Posted November 11, 2013 WME, The brown and green wire right? Any Idea what the other mounted one is for or the taped one with the white dot is for??? Quote Link to comment Share on other sites More sharing options...
Gatorbob Posted November 11, 2013 Author Share Posted November 11, 2013 Here are the connectors Quote Link to comment Share on other sites More sharing options...
linda s Posted November 11, 2013 Share Posted November 11, 2013 Here's the instructions and where I got the pic. It's the smaller one with only 2 connections. Top one on the last picture you posted. http://www.4crawler.com/4x4/CheapTricks/TroubleCodes/#Early22RE Linda S Quote Link to comment Share on other sites More sharing options...
5Toyota Posted November 14, 2013 Share Posted November 14, 2013 i have seen this happen with bad distributer before on some cars and my son had a lot of trouble with his 94 6 cyl four runner. bad solid state componets in the distribiter will cut out. when they get hot half an hour two cool fires right up again. gets hot quits . replced parts in a dodge dist this is what the dodge was doing also. kept shutting down . bad transisters. replced dist in four runner end of problem Quote Link to comment Share on other sites More sharing options...
Gatorbob Posted November 25, 2013 Author Share Posted November 25, 2013 I replaced the coil about 2 weeks ago. Drove a full tank with no stall. Hope that was it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.