Baseball Dad Posted September 27, 2016 Share Posted September 27, 2016 I have an 87 Dolphin was wondering if some one already replace there shocks and steering stabilizer? If so, whats the # 's and what kind of shocks? Thanks. Quote Link to comment Share on other sites More sharing options...
Jaunt Posted September 27, 2016 Share Posted September 27, 2016 (edited) using the search function is gonna save you a lot of time. i installed bilsteins on mine, currently need a new stabilizer. Edited September 27, 2016 by Jaunt Quote Link to comment Share on other sites More sharing options...
zulandio Posted September 27, 2016 Share Posted September 27, 2016 19 minutes ago, Baseball Dad said: I have an 87 dolphin was wondering if some one already replace there shocks and steering stabilizer? If so whats the # 's and what kind of shocks.Thanks. http://www.shockwarehouse.com/index.cfm?mode=results&selected_model=4485&selected_year=1988 I think I got mine from another place for a little cheaper I only bought rears. But my leaf springs are worn out too so it still sags. However I do have airbags so between the new shocks and airbags it works out. Quote Link to comment Share on other sites More sharing options...
Baseball Dad Posted September 27, 2016 Author Share Posted September 27, 2016 Thank you Zulandio Quote Link to comment Share on other sites More sharing options...
BobBeery Posted September 27, 2016 Share Posted September 27, 2016 I have a steering stabilizer supposed to fit supposed to be coming FedEx today. After I get it in and know it fits I will give details. Quote Link to comment Share on other sites More sharing options...
WME Posted September 27, 2016 Share Posted September 27, 2016 The Shock Warehouse has the 3 "normal" shocks for Toyotas. The pricing also reflects good, better, best. Choose your poison. Quote Link to comment Share on other sites More sharing options...
Baseball Dad Posted September 28, 2016 Author Share Posted September 28, 2016 thanks bob can you tak some pic Quote Link to comment Share on other sites More sharing options...
Got Toyota Posted October 14, 2016 Share Posted October 14, 2016 Hello, I haven't done the shocks in the back yet ,but that steering stabilizer is a freaken dealership part. I bought one that is listed online but it is straight attached when the original is curved. so when trying to install it , it has to be forced in and puts quite a bit of pressure on the connecting bushing. I couldn't leave it like that. I put the old one back in and found one at parts geek for a little less than the dealership wanted. Quote Link to comment Share on other sites More sharing options...
BobBeery Posted October 16, 2016 Share Posted October 16, 2016 On 9/27/2016 at 8:41 AM, BobBeery said: I nave a steering stabilizer supposed to fit supposed to be coming FedEx today. After I get it in and know it fits I will give details. Yes it fit and it works. I am not at home now and won't be for a month but this is what I remember: part is Skyjacker series 7000. Specific part number is 7186 and has a set of brackets with it. Be sure to get the brackets, you will need them for the end that goes on the tie rod. DO NOT get part number 7900. It is the same damper but without brackets. This will mount normally at the frame end. On the end that goes on the tie rod there will be a new bracket secured by two 'U' bolts. I have been told that Jeeps used a similar clamp but cannot verify this. I bought online free shipping for more than $50 but less than $60. Quote Link to comment Share on other sites More sharing options...
Jaunt Posted October 17, 2016 Share Posted October 17, 2016 On 10/14/2016 at 10:37 AM, Got Toyota said: Hello, I haven't done the shocks in the back yet ,but that steering stabilizer is a freaken dealership part. I bought one that is listed online but it is straight attached when the original is curved. so when trying to install it , it has to be forced in and puts quite a bit of pressure on the connecting bushing. I couldn't leave it like that. I put the old one back in and found one at parts geek for a little less than the dealership wanted. Can you post the part number? Quote Link to comment Share on other sites More sharing options...
Got Toyota Posted October 20, 2016 Share Posted October 20, 2016 This is the one I put on my mh. It made a huge difference while driving Quote Link to comment Share on other sites More sharing options...
Jaunt Posted October 30, 2016 Share Posted October 30, 2016 I got the Rancho unit for ~$75 Quote Link to comment Share on other sites More sharing options...
Baseball Dad Posted November 1, 2016 Author Share Posted November 1, 2016 Thanks you guys but mine is a 87 so probably different. Quote Link to comment Share on other sites More sharing options...
linda s Posted November 1, 2016 Share Posted November 1, 2016 2 hours ago, Baseball Dad said: Thanks you guys but mine is a 87 so probably different. here's one for your rig. http://www.oreillyauto.com/site/c/detail/MOO0/SSD106.oap?ck=Search_45700-39035_1277108_3539&keyword=45700-39035&doInterchangeSearch=true Linda S Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.