bvsajjan Posted July 20, 2017 Share Posted July 20, 2017 (edited) I have a leak in the assembly of my 1990 Toyota Odyssey Grey and Black Water Tank Release Valve. It is an assembly with a Y and both Grey and Black are released out of the same outlet with 2 gates, one for each tank. The grey outlet is 2.5" and the black side is 3". I need the whole Y assembly! The break is on the black water side connection. (see photo) The brand is Valtera Bladex Valve and the part number on the unit is Anonda V9B2 ABSI Please let me know where I can get the exact part.... I am inserting photos..... Edited July 20, 2017 by bvsajjan text mistake Quote Link to comment Share on other sites More sharing options...
Derek up North Posted July 20, 2017 Share Posted July 20, 2017 The 'Anonda' name appears to belong to these guys:- http://www.lasallebristol.com/products/plumbing/pipe-fittings/ Quote Link to comment Share on other sites More sharing options...
WME Posted July 20, 2017 Share Posted July 20, 2017 Found 2 somethings, neither is fully correct. http://www.ebay.com/itm/Rv-valterra-WASTE-VALVE-SEWER-ASSEMBLY-rotating-sewer-gate-3-hubx1-1-2-hub-3-cap-/371482288447?hash=item567e11e13f:g:zLEAAOSwo0JWPlUt&vxp=mtr http://www.homedepot.com/p/3-in-x-3-in-x-2-in-ABS-DWV-Hub-x-Hub-x-Hub-Long-Radius-Sanitary-Tee-C5812LHD332/100345360 The second one is also available in 3"x3"x3" Quote Link to comment Share on other sites More sharing options...
bvsajjan Posted July 20, 2017 Author Share Posted July 20, 2017 Thank you both for your replies but it is not what I need exactly.... any other ideas anyone? Quote Link to comment Share on other sites More sharing options...
linda s Posted July 20, 2017 Share Posted July 20, 2017 19 minutes ago, bvsajjan said: Thank you both for your replies but it is not what I need exactly.... any other ideas anyone? Can you show me a close up of the break. ABS pipe is easy to fix. Very easy if you can remove the Y section to work on it. A good time to get new blade valves too. Linda S Valtera does not make a blade valve for a 2.5 inch opening. Either it's 2 inch or it just isn't made anymore. There are reducers that can be used but easier to fix what you've got. Show me break Quote Link to comment Share on other sites More sharing options...
linda s Posted July 20, 2017 Share Posted July 20, 2017 here's one with a 2 inch grey hub and spigot would come out the side instead of the back. https://www.amazon.com/Valterra-T18-Double-Rotating-Valve/dp/B002N5L9UU/ref=pd_day0_263_4?_encoding=UTF8&pd_rd_i=B002N5L9UU&pd_rd_r=9WH9HVKQFZEW33TSGD5S&pd_rd_w=FaGHQ&pd_rd_wg=KLAvT&psc=1&refRID=9WH9HVKQFZEW33TSGD5S Linda S Quote Link to comment Share on other sites More sharing options...
Derek up North Posted July 20, 2017 Share Posted July 20, 2017 8 hours ago, bvsajjan said: Thank you both for your replies but it is not what I need exactly.... any other ideas anyone? Contact Lasalle-Bristol and ask if it's even made any more and also see if the can confirm the diameters you think you're looking for? Quote Link to comment Share on other sites More sharing options...
jjrbus Posted July 20, 2017 Share Posted July 20, 2017 Looking at your "break" it looks more like something coming apart. Your black or grey tank is loose, moving and stressing the fitting, possibly the flexible rubber fitting is a bit too long and needs to be trimmed?. Where it has come apart may need a snap ring or I am sure it could be welded/glued back together. Welding/gluing would be the easier softer way for me. Your chance of finding that fitting are dismal, if you do find one, buy a lottery ticket also! Not a plumber, another toy owner with a few opinions. Jim Quote Link to comment Share on other sites More sharing options...
bvsajjan Posted July 25, 2017 Author Share Posted July 25, 2017 Thank you all! Sorry for not replying but busy with it and so much other stuff.... I went to DC parts in Bakersfield, CA and they had the exact assembly in separate pieces! All assembled and working great. But.... the jiggling and vibration while undergoing repair to the tube that goes to the grey water tank from the shower drain above the dump assembly... has developed a leak....! :-( What a bummer! Now I will probably have to drop the grey water tank to fix the joint to from the shower drain and kitchen sink into the grey water tank..... Any advice here? Quote Link to comment Share on other sites More sharing options...
jjrbus Posted July 26, 2017 Share Posted July 26, 2017 16 hours ago, bvsajjan said: Thank you all! Sorry for not replying but busy with it and so much other stuff.... I went to DC parts in Bakersfield, CA and they had the exact assembly in separate pieces! All assembled and working great. But.... the jiggling and vibration while undergoing repair to the tube that goes to the grey water tank from the shower drain above the dump assembly... has developed a leak....! :-( What a bummer! Now I will probably have to drop the grey water tank to fix the joint to from the shower drain and kitchen sink into the grey water tank..... Any advice here? You found that part! Buy a lottery ticket. Quote Link to comment Share on other sites More sharing options...
linda s Posted July 26, 2017 Share Posted July 26, 2017 If you have the receipt with a part numbers I would appreciate your posting that. We spend a ton of time searching for parts for people and sooner or later someone else is going to need that. Linda S Quote Link to comment Share on other sites More sharing options...
bvsajjan Posted July 27, 2017 Author Share Posted July 27, 2017 Quote Link to comment Share on other sites More sharing options...
linda s Posted July 27, 2017 Share Posted July 27, 2017 Thank you. It was the 2 1/2 inch measurement that was throwing us. 2 inches makes much more sense Linda S Quote Link to comment Share on other sites More sharing options...
jjrbus Posted July 27, 2017 Share Posted July 27, 2017 I typed bend collector slip hub into search with and without the part number and not one result looked like that part! Quote Link to comment Share on other sites More sharing options...
linda s Posted July 27, 2017 Share Posted July 27, 2017 With the part number it came right up for me. Valterra is the maker https://accessories.lazydays.com/valterra-bend-collector-slip-hub-t10301-11-0623 Linda S Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.