Jump to content

bvsajjan

Toyota Advanced Member
  • Posts

    33
  • Joined

  • Last visited

About bvsajjan

Previous Fields

  • My Toyota Motorhome
    1990 Odyssey 6cyl Auto
  • Location
    San Diego, CA

Profile Information

  • Gender
    Male

Recent Profile Visitors

930 profile views

bvsajjan's Achievements

Newbie

Newbie (1/14)

  1. I have a 1990 Odyssey and have a leak in the tank in the water heater (Atwood A6G6). Can I just replace the tank or do I need to replace the entire water heater?
  2. I have a serious leak in the assembly of my shower faucet and need to replace it. Amazing it has lasted this long! I have a '91 Odyssey.... Will a regular home assembly this size work? Hookup hot and cold line are plastic 1/2 inch .... Thanks!
  3. Myself and a friend spent most of the day taking out the hot water heater assembly, dropping the tank and repairing the disconnected PVC "T" and replacing the grey water tank and then the hot water heater assembly..... tada! Wow! What a job! At least it's done now. It lasted 27 years and broke only due to one of the brackets to the tank breaking through the floor from age and wear. The vibrating tank being loose eventually developed a crack in the "T" from the kitchen sink and shower drain. We rigged a bracket to reconnect the bracket to be held strong where it broke through the floor.
  4. While repairing the release assembly to both grey and black water pipes, and also the shower drain trap.... I have a leak at the inlet to the grey water tank coming from the shower drain pipe! :-( This is totally unaccessible except if I drop the tank, I think. I have accessed this before through the area that is accessible if I remove the hot water heater assembly which is under the kitchen sink area. There was a leak there above the area where there seems to be one now. This old rig has these little things popping up now and then, but is in great condition! Low miles <60 K!!! Any advice on this would be very much appreciated!
  5. Thank you all! Sorry for not replying but busy with it and so much other stuff.... I went to DC parts in Bakersfield, CA and they had the exact assembly in separate pieces! All assembled and working great. But.... the jiggling and vibration while undergoing repair to the tube that goes to the grey water tank from the shower drain above the dump assembly... has developed a leak....! :-( What a bummer! Now I will probably have to drop the grey water tank to fix the joint to from the shower drain and kitchen sink into the grey water tank..... Any advice here?
  6. Thank you both for your replies but it is not what I need exactly.... any other ideas anyone?
  7. I have a leak in the assembly of my 1990 Toyota Odyssey Grey and Black Water Tank Release Valve. It is an assembly with a Y and both Grey and Black are released out of the same outlet with 2 gates, one for each tank. The grey outlet is 2.5" and the black side is 3". I need the whole Y assembly! The break is on the black water side connection. (see photo) The brand is Valtera Bladex Valve and the part number on the unit is Anonda V9B2 ABSI Please let me know where I can get the exact part.... I am inserting photos.....
  8. I have a 91 Toyota Odyssey with dualies 6 nut upgraded axle. 6cyl Auto I have a serious leak on the left side airbag. Is it ok to replace one? And what are the specs so I can order it or tell a mechanic. thanks!
  9. I have a 1990 Toyota Odyssey 6cyl Auto V-6. The Progressive Dynamics Coverter PD 7231 just seems it's getting ready for being upgraded... What is the best upgrade for this? And/or should I just keep doctoring up the old one? thanks! I have a good Solar Power 150watt panel now also with controler...
  10. Now I have this solar power system and when I leave it for storage... it will continue to charge if needed. thanks for this info, and help...
  11. I removed the wire harness from the battery charger circuit board and bingo! The unit still powers the 12V system and 120V refrigerator, but is not charging the battery! Thanks yababy! :-)
  12. This converter although old has worked great for the 3 years I have had it. Only once I had to use a jewelers file to clean the contacts on the magnetic connectors that switch the system from battery to the AC power. Anyone know if the battery charger circuit board can be modified?
  13. Ok, I downloaded a owner's manual for this model... It says that the battery charging is automatic! It has a feature of a red light that when fully charging is constant red. Trickle charging at 90% flashing red. Red light off. Fully charged! But the light comes on constant when plugged in at first! And then it stays constant for hours. But the battery is fully charged from the solar panels. Any comments? Suggestions?
×
×
  • Create New...