fred heath Posted December 26, 2011 Share Posted December 26, 2011 I've had really good luck with advice from this forum. I have a 1978 toyota galavan with the 20R engine and 4 speed trans. There's a lot of "slop" in the shift handle. I suspect it's bushings, but have been unable to find any online supply houses that carry them for a unit this old. I plan on replacing the clutch and rear main oil seal in the near future. Would be nice to do this at that time. Thank you in advance. Fred Quote Link to comment Share on other sites More sharing options...
5Toyota Posted December 26, 2011 Share Posted December 26, 2011 if that is the L43 four speed i have the same in my1978 minimax 20r 4 speed same problem it got worse pulled up the boot retaining cups poped out let spring pop up . these are a side mount shift i bought a whole tranie at a yard the linkge is bizzare but easy to change will sell xtra tranne but used linkge take 2500 for whole minimax runs great bought 87 dolphion s. ee on sale site. with xtra parts only 4 minimax known too ext. Remove two bol ts on side of trans remove lever Quote Link to comment Share on other sites More sharing options...
Maineah Posted December 27, 2011 Share Posted December 27, 2011 They are the same as the later model ones I do believe. Toyota should have them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.