kevinchinook Posted February 16, 2021 Share Posted February 16, 2021 After removing the stock interior from my Sunrader Adventure(you wouldn't believe how much rodent poop was under the shower floor/ toilet/aux battery/heater/everything). I noticed the fiberglass is separating at the wheel wheel slightly. Any input on this best way to repair? Is it something I should worry about? Quote Link to comment Share on other sites More sharing options...
linda s Posted February 16, 2021 Share Posted February 16, 2021 Fiberglass mat and resin would be the best fix. Figure out how to apply some pressure to the outside to push the crack tight. Piece of plywood braced with a board to the ground maybe. Linda S Quote Link to comment Share on other sites More sharing options...
WME Posted February 16, 2021 Share Posted February 16, 2021 Yes mat and resin , but first you need to peel off the old mat, sand and clean the surface where you will be applying the new mat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.