waiter Posted January 16, 2011 Share Posted January 16, 2011 I took the four screws out that hold the furnace to the wood frame. I removed the propane line. I cannot get the furnace to budge. I looked in all the cabinets surrounding the furnace, I didn't see any screws or bolts. What am I missing??? 88 Dolphin, Furnace is below the sink. Quote Link to comment Share on other sites More sharing options...
Lee & Joan Posted January 16, 2011 Share Posted January 16, 2011 I had a somewhat similar problem, but my Hydroflame is mounted under the rear seat of a rear dining Sunrader. What was holding up the show was two wood screws in the rear bottom of the heater, screwing it to the floor. I took of the outside chassis frame and undid all those screws, pulled off the copper gas pipe and it would not come out until those two floor screws did. Hey I will trade you jobs today, I am replacing the back wall, it was built before everything else was installed. I think I need to go ride my bike and you probably need to fly your plane? Quote Link to comment Share on other sites More sharing options...
WME Posted January 17, 2011 Share Posted January 17, 2011 On some heaters the outside vent has to be unscrewed Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.