Jump to content

Sunrader roof weight tolerances


Viking66

Recommended Posts

One trick I have used when unsure of weight support,

I have used this on fiberglass greenhouse roofing. get a very stiff piece of plywood, perhaps cushion it with a rug against the fiberglass roof. Then you can stand on that and it spreads your weight over a much larger area than your foot does. Much like a showshoe. I have two smaller ones so I can work kneeling on one and move the other one over to the next area.

Also when I have not had the plywood I have just spread my weight out by laying down on my belly and kind of scooting around spreading my weight on my legs, arms & belly. I have crawled around on some pretty thin stuff that way. Picture thin ice or quicksand, get the weight off the feet an spread over the larger body area and you don't break the ice or sink in the quicksand.

Edited by Lee & Joan
Link to comment
Share on other sites

Sunrader roofs are 3/4 inch plywood with fiberglass on top so they can support your weight no problem. I am plus that by a bit and never worried about our SR roof when on top. I would crawl around but I only say that because walking can cause the rig to do some rockin and throw you off balance, you can fill in the blanks.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...