rad wolfe

have you pulled the plug wires on all 6 cylinders to check for the misfire?

I cant find where I have ever used the term "cult" before. In fact my post mainly consisted of a quote in the report totem made about what happened when he attended the wheatland music festival. the following in red is the quote from Wheatland Music Fest in Toy : "Almost everyone I spoke to considered this site and its inhabitants to be members of a "cult" Are we a "cult"? I don't really get that accusation as in my experience, cults push away family members and excommunicate others. One gentlemen I spoke with who refused to give his former handle said he dropped out because of "personality conflicts" with others; namely perceived hostilities from the "ringleaders" he stated. So as a footnote and word of advice to you "ringleaders" - this is the general consensus I received at a large sampling of data." So snail powered - could you specify the thread(s) where I used the this term. My question - in blue- was meant to be humorous... but obviously failed to be. So I have to ask, is a forum that has a topic title devoted to 2 cult heroes like this one a cult?

your axle looks like the good one - full floater. probably the most important upgrade for an older toy RV. hope you enjoy it.

quoting totem on another related topic, "Almost everyone I spoke to considered this site and its inhabitants to be members of a "cult" Are we a "cult"? I don't really get that accusation as in my experience, cults push away family members and excommunicate others. One gentlemen I spoke with who refused to give his former handle said he dropped out because of "personality conflicts" with others; namely perceived hostilities from the "ringleaders" he stated. So as a footnote and word of advice to you "ringleaders" - this is the general consensus I received at a large sampling of data." So I have to ask,is a forum that has a topic title devoted to 2 cult heroes like this one a cult? a "cult site"?

"The original injectors have a rectangular shaped connector with right-angle corners. Denso # 23250-5011." Not to be picky but looking at the pic provided I think the number is -45011 not -5011...hope you ordered the right ones.

great pics (and title).

in fact the original post referred to a "shutter" not a "shudder" or "sputter" or "stutter" so who knows....only the OP.

I thought they meant stuttering or sputtering, which is why I suggested the fuel filter .

Have you checked the fuel filter? it may be clogged up?

mustrmrk, on 11 Jul 2015 - 08:28 AM, said: At noon on a sunny day I've seen over 15 amps going into the batteries from our two 120w panels. isnt that about the same as : The most I've ever read on a 120 watt panel (Kyocera, Evergreen, or Sharp) was 6.8 amp @ 14 volts amps in full sun

I think sideways tanks have a different float setup & usually cost more than a BBQ tank, probably dangerous to use your blue rhino. other more knowledgeable owners will probably reply.

try checking Insta-Matic 3 way fridge .I got plenty of hits on google.

I used Zep floor polish as recommended by many here. Cheap, effective and pretty easy to apply. clean surface with 'barkeepers friend' then a few layers of 'Zep'. Did a great job on my 87 Blue Marlin.

Originally the phrase was 'pain in the a-r-s-e' but earlier on the word police got to it and amended it to the current 'pain in the a-s-s'. soon urinate-poor & not-heaven will substitue for piss-poor & hell.

on vertical surfaces it's important not to spray 2 much at each pass as the drip factor is critical. A light touch is important and as Corbin states a practice run on cardboard helps... I'd suggest using a glossy surfaced cardboard or use hardboard so you get a feel for a non-absorbent surface .

sure looks like a recent sloppy repaint , tires have silver paint, under the hood has overpaint of both white & black on hoses, brake master cylinder,power steering reservoir,rad saddle,firewall at fender rust damage etc...maybe I'm 2 suspicious but I'd check 4 more structural damage.

did the polarity reversal do any damage to the coach electrical s ystem?

no need to convince anyone, it's obvious you deliberately put a slight curve to the inserts!

you may have already looked for info at https://groups.yahoo.com/neo/groups/nissan_motorhomes/info although it doesn't look very active.

thanks for doing this work and sharing this information.

given that the torque is 170 ft/lbs I also bought the separate 23 mm instead of using the 'close' but not 'perfect' 15/16" socket.

if you earn a 'star' does it go on your permanent record?

If it had the 2000 engine instead of the 1600 that RV would still look like my mailbox.

straightforward & well executed! Can you still use the the thermo for cooking meat ? I always liked dual purpose gear.

yeah , these were more reminiscent of an AH-100 / MGA look.