Bunneys Posted June 30, 2011 Share Posted June 30, 2011 While I had the cluster out for the cluster swap, I noticed the single cup holder in the dash could be replaced with the dual one. I had to remove the punch-out cover so the unit would slide-out, I did this with a sharp knife. Other than that it was un-screw the old one, screw-in the new one easy... Original single one Single one next to the dual Installed with the punch-out cover removed Dash back together Also, you can get a small shelf from the SR5 4runners under the radio. This is added to the cover that is just plain on our 89-95 trucks. Super easy to switch you don't even need tools! Just use something like a pen to push in the middle of the two little push-in pins on either side to be able to pull them out. The cover is now loose and you are able to remove it. Place the new cover in with the shelf, line-up the holes, push the pin part of the push-in pins back out so you can incert it thuough the hole and the push the pin back in so it is flush. Done! before after Side-by-side After you realize that there is another place to store stuff... Quote Link to comment Share on other sites More sharing options...
troyrobo Posted July 1, 2011 Share Posted July 1, 2011 another nice upgrade Quote Link to comment Share on other sites More sharing options...
Derek up North Posted July 1, 2011 Share Posted July 1, 2011 The best mods are the ones that look like 'Factory'! Unless it's a Yugo. Note: We were spared the Yugo. Russia sent us the Lada instead! Quote Link to comment Share on other sites More sharing options...
Maineah Posted July 2, 2011 Share Posted July 2, 2011 I have a brand new Tacoma it has 13 yes 13 cup and bottle holders and all kinds of messages about where bottles and cups belong! This mind you is in a truck that on a good day can carry 2 adults 2 kids or 2 very uncomfortable adults in the back that's 3 1/4 holders per person! Quote Link to comment Share on other sites More sharing options...
dayoff53 Posted July 7, 2011 Share Posted July 7, 2011 That dash/instrument cluster looks real nice, Andrew! Craig just found an instrument cluster out of a T-100 for me, including the tach and trip odometer, and I will probably install it this weekend. At the same time, I'll install a 2nd cigarette lighter and make both of them hot all the time. We are also both going to install "oh, shit!" handles that Craig also picked up from various T-100s and 4-Runners at the junk yard. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.