Jump to content

1984 toyota sunrader renovation


tropicstar

Recommended Posts

1984 sunrader renovation 4 coats of kilns white primer and finish coat all in one paint semi gloss white, removed carpet in and around over cab face and entry door. Recovered with a headliner like fabric, and recovered with same bothsides and deck of overcab. Attached with spray adhesive contact cement. A woven brown leather fabric around entry door. Over cab front windows have reflectix aluminum bubble wrap  for privacy and insulation factor keeping cold and heat out with velcro tabs for remove and replace, all other windows will be done. 

20210917_084528.jpg

20210919_074744.jpg

20210920_060242.jpg

20210920_060149.jpg

20210926_103527.jpg

20210926_173659.jpg

Link to comment
Share on other sites

Recycled smaller Table, and stove top cover,, cutting board sink covers for more counter space New vinyl wood look floor installed after quarter inch plywood redeck all screwed down to cover carriage bolts , holes cut over carriage bolts and filled with wood putty flush again. Trim on edges still needed. And edge guards. I cut 2-half inch plywood boards for the extra cushions for dinette bed that slide under dinette cushions, so larger table for bed not needed.

20210924_080532.jpg

20210924_080636.jpg

20210926_212418.jpg

20210927_144752.jpg

20210927_154803.jpg

20210927_210856.jpg

20210928_002750.jpg

Link to comment
Share on other sites

On 10/7/2021 at 9:55 AM, tropicstar said:

Recycled smaller Table, and stove top cover,, cutting board sink covers for more counter space New vinyl wood look floor installed after quarter inch plywood redeck all screwed down to cover carriage bolts , holes cut over carriage bolts and filled with wood putty flush again. Trim on edges still needed. And edge guards. I cut 2-half inch plywood boards for the extra cushions for dinette bed that slide under dinette cushions, so larger table for bed not needed.

20210924_080532.jpg

20210924_080636.jpg

20210926_212418.jpg

20210927_144752.jpg

20210927_154803.jpg

20210927_210856.jpg

20210928_002750.jpg

 

20211008_181810.jpg

Link to comment
Share on other sites

Floor trim added and reflectix aluminum bubble wrap to keep heat and cold out and a great privacy curtain, velcro tabs added for quick removal and re install

20211008_075243.jpg

20211008_075117.jpg

20211008_075302.jpg

Link to comment
Share on other sites

Just now, tropicstar said:

Floor trim added and reflectix aluminum bubble wrap to keep heat and cold out and a great privacy curtain, velcro tabs added for quick removal and re install

20211008_075243.jpg

20211008_075117.jpg

20211008_075302.jpg

20211009_055417.jpg.9302ddb5e568af7f54b36a2d57e276b3.jpg

Link to comment
Share on other sites

2 hours ago, linda s said:

Thank you for sharing your wonderful renovation with us. It looks beautiful. 

Linda S

Thank you, I appreciate your compliment Linda,  that means so much coming from you a toyota motorhome consultant legend!

All cushions were sent to upholstery shop for new foam and new fabric.  I had a carburetor rebuild. All fan belts replaced, All new radiator hoses, and heater hoses, radiator flush , new thermostat and coolant, oil change and filter.  50 point checkover given from rv service all appliances working , new toilet installed, all tanks working as they should.

Thank you toyotamotorhome.org for sharing my renovation!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...