Gyro09 Posted September 24, 2018 Share Posted September 24, 2018 Took out a section of the floor for being to soggy and just wondering what I can use for the bottom backing? What I removed was carpet, 3/4 sandwich board, some sort of insulation and the fiberglass as the outer most layer. The fiberglass just kinda seemed to sagged/be resting on the muffler (was burned threw) Also does this part of the floor offer structural integrity? Seems to only go under the benches about an inch on each side. Was thinking just replacing with same type of board, insulating the whole floor from inside the RV and laying carpet. As for the bottom thing just spraying some truckliner. Thoughts? Quote Link to comment Share on other sites More sharing options...
hunkaman Posted September 25, 2018 Share Posted September 25, 2018 photos of a ( your) problem are often very helpful to diagnose the situation properly. joe from dover. Quote Link to comment Share on other sites More sharing options...
Gyro09 Posted September 26, 2018 Author Share Posted September 26, 2018 15 hours ago, hunkaman said: photos of a ( your) problem are often very helpful to diagnose the situation properly. joe from dover. Got it figured out with the help of a local. I'm just diving into the thing so Im sure im gonna have lots of question here very soon. Could get the pics to upload kept on getting an error messaged, tried on phone and laptop. TY you though Quote Link to comment Share on other sites More sharing options...
linda s Posted September 27, 2018 Share Posted September 27, 2018 Lower resolution on your pics. has worked for others Linda S Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.