linda s

If you watch the video of dismantling it you can see that a battery screw driver will not give you the correct access to all the hidden bolts and screws. Smaller rachet with multiple extensions seems to be what he uses and even those are a difficult reach for some of them. I certainly wouldn't want to have to do this job. Is your core leaking or just clogged. Linda S

Stupid expensive. I'd offer way less. On the other hand the nissan tank is brand new. Too wet here for me to get exact measurements. Linda S

That was 3 different links. I'm sure someone would have answered. Just checked. All 3 places answered the phone. You must have dialed wrong Linda S

Try here Used Auto Parts For Sale | Benzeen Auto Parts European Auto Recycling ToyAuto Mart | Rancho Cordova, CA (toyautomartca.com) Might be old listings. You must call first. Don't forget to ask about wheels. You'll need those too. At least 4 Toyota dually wheels Linda S

Or maybe used? This one looks like it would clean up nicely. Same tank as yours and not far from you https://imageappky.car-part.com/image?seller=9872&partsourceid=9872&partGUID=1E6C32C5-89FC-4499-B716-3298EA16ED01&vehicleGUID=&display=1990 Toyota Truck Fuel Tank Assembly-Stock%23 00190566#1 Linda S

Do you have a little more room for a tank. Little bit longer? If so consider this tank. Same tank that's in my Nissan Sunrader, 21.5 gallons and solid Nissan quality. 17202-11G00 Genuine Nissan #1720211G00 Fuel Tank Assembly (nissanpartsdeal.com) Linda S

Your tank is in the rear. Not a Toyota fuel tank or anyone I've ever seen. What are the dimensions. Linda S

This place has one listed on car-part.com. http://www.philsautosalvage.com/ In Colorado Linda S

1985 to 1988 G54 out of a 22r, not 22re. Linda S

We need to go back to your removing Sunrader bathroom thread. Please post some pics of this riveted thing there. Linda S I can't move just these posts

Black tank seal. Lip inserts to tank and pipe from toilet just pushes into place. Most replace it by dropping the black tank https://www.amazon.com/Valterra-F02-2106-Rubber-Tank-Grommet/dp/B00PHN2O8G/ref=asc_df_B00PHN2O8G/?tag=hyprod-20&linkCode=df0&hvadid=312342603579&hvpos=&hvnetw=g&hvrand=14367928086398167482&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9032372&hvtargid=pla-567693199430&psc=1

I used a piece of wood with 2 bolts through it to fit into the holes. Nothing has fallen apart yet Linda S

Don't know what those rivets look like. Just searching what others have done in the past. Most have just cut that flange off but at least a couple said they unscrewed theirs. This is a good pic of one from a 1980 Sunrader. Does it look like yours? Also I emailed Toyoguy and asked if he could jump in and let us know how he got his out. We'll see what he says Linda S

That ring is the closet flange. Try unscrewing it. Some lubricant and a little heat might help Linda S

You actually don't have to remove the blower but that's the only thing you can leave. The entire freaking dash needs to come out. Replace Heater Core/ Dash removal (1986Toyota pickup) - YouTube Linda S

I don't think you have to make any changes. AC and heater are just hooked up to the same blower. Your inside switch that turns the AC on is what determines where the air coming through that blower comes from. Linda S

Mine doesn't have a window so I didn't even think of that Linda S

Toyoguy removed his bathroom to replace his floor tnen put it back. You can look him up and message him. First order of course is removing all the plumbing connections. Toilet threshold, shower drain and sink pipes. Pretty sure after those are out you will get a better idea of what else might be holding it. No brackets or feet except for the leveling pieces I see at the front. Metal yardstick slipped underneath will help you find possible attachments Linda S

You're going to need an 83 bumper too. Lots of RVs have been built on a truck a year earlier than the coach. A pain but not that uncommon. Linda S

First 2 have been taken from the Toyota camper IO group. You will probably have to join to see them, toyota-campers@groups.io | Home 86-SunraderOwnersManual-Cover.jpg (groups.io) INST NT 12 16 20 S 204031 5-17-06 REV B.pdf (groups.io) More appliance manuals at Bryant RV manuals Service Documents and Manuals (bryantrv.com) Have no newer Sunrader manual but you can see it doesn't have much info anyway. This person has been selling these CD's for years. Some people have been happy with them. Surorised they haven't upgraded to digital. Who has a CD anymore. SUNRADER MOTORHOME OPERATIONS & AC FURNACE MANUALS for Toyota RV w/ Appliances | eBay Linda S

You're talking about running the tires at max pressure. None of us do that, but when needed we have the capacity to blow them up if needed. If you're ride is really harsh you need to look at the suspension. Even so, it's never going to drive like a Cadillac. Can't really see much of that car but looks like a Mazda rx7 to me Linda S

According to the KYB company website the model number WME posted is the correct shock for a 1983 Toyota truck. Linda S

Singles would have to be custom made to fit the lug pattern. A few years ago one of our members had some made at Stockton Wheel. Don't know if they are still doing that. Your wheels are still not going to be interchangeable because of the different patterns front and back. I only carry a spare for the front. I have gotten flats in the back several times. I remove the bad tire, blow the remaining one to max and drive slowly until I can get it serviced. Also, even if you add a sway bar, nothing gives you more stability on the road than the duallys. They don't make it run rougher either. Don't know where you got that idea Linda S

Parts at Amazon Outer Amazon.com: SKF 99138 Speedi-Sleeves : Automotive Can't find the inner anywhere Linda S

I don't think a lot of them were made. Finding actual manuals from 45 years ago is a stretch. Manual didn't have very much info in them anyway. Has yours had the axle upgraded. Kind of important. For specific questions we can usually help. Anytime Linda S