90micromini Posted April 22, 2012 Share Posted April 22, 2012 Good morning cruise control on 90 toy not working . Checked the fuse already. any ideas or just hit the repair shop? Quote Link to comment Share on other sites More sharing options...
Totem Posted April 22, 2012 Share Posted April 22, 2012 vacuum or aftermarket? Quote Link to comment Share on other sites More sharing options...
MAXXFabrication Posted April 22, 2012 Share Posted April 22, 2012 brake light switch, brake fluid level switch, speed sensor, vacuum line. 4 thins to check. posting up what year, model (engine) would be a little more helpful. as well as Totems post, factory or aftermarket cruise control? Quote Link to comment Share on other sites More sharing options...
90toydolphin Posted April 22, 2012 Share Posted April 22, 2012 i had same problem, 1990 dolphin V6-auto, filled brake fluid and then worked and has sense. it really wasn't that low so if not right at full line top it off. good luck. Quote Link to comment Share on other sites More sharing options...
Derek up North Posted April 22, 2012 Share Posted April 22, 2012 If it's factory, you'll want this:- http://personal.utul.../10cruiseco.pdf If it's Aftermarket, good luck with Google finding instructions! Quote Link to comment Share on other sites More sharing options...
90micromini Posted April 23, 2012 Author Share Posted April 23, 2012 If it's factory, you'll want this:- http://personal.utul.../10cruiseco.pdf If it's Aftermarket, good luck with Google finding instructions! Quote Link to comment Share on other sites More sharing options...
90micromini Posted April 23, 2012 Author Share Posted April 23, 2012 It's factory and its a 1990 V6, thx will check brake fluid Quote Link to comment Share on other sites More sharing options...
90micromini Posted April 24, 2012 Author Share Posted April 24, 2012 Ok It's aftermarket, Rostra or something like that. Anyone know how that works? Quote Link to comment Share on other sites More sharing options...
waiter Posted April 24, 2012 Share Posted April 24, 2012 Check the brake fluid level, top it off, also check the parking brake handle to make sure it fully retracts and doesn't turn on the "brake" light. Broken wire at the brake switch. Some of these models used magnets on the drive shaft and a sensor to pick up the magnets. They can also get Vehicle speed from the Trucks computer. This is a fairly common unit, should be able to find diagrams etc on internet. John Mc 88 DOlphin 4 Auto Quote Link to comment Share on other sites More sharing options...
90micromini Posted April 24, 2012 Author Share Posted April 24, 2012 Check the brake fluid level, top it off, also check the parking brake handle to make sure it fully retracts and doesn't turn on the "brake" light. Broken wire at the brake switch. Some of these models used magnets on the drive shaft and a sensor to pick up the magnets. They can also get Vehicle speed from the Trucks computer. This is a fairly common unit, should be able to find diagrams etc on internet. John Mc 88 DOlphin 4 Auto Quote Link to comment Share on other sites More sharing options...
90micromini Posted April 24, 2012 Author Share Posted April 24, 2012 (edited) John, where do I start looking even to find the main components so I can fiqure out what it is? Has a handle coming off of the steering column with on-off-resume and resembles rostra I found on line. But I have found no main components mostly cause I dont know what I'm looking for............ Edited April 25, 2012 by 90micromini Quote Link to comment Share on other sites More sharing options...
Derek up North Posted April 24, 2012 Share Posted April 24, 2012 Have a look to see if these components look familiar:- http://www.tacomaworld.com/forum/1st-gen-tacomas/154342-rostra-cruise-control-installation-2002-v6-auto.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.