Dolphinite no longer here Posted May 13, 2009 Share Posted May 13, 2009 Hello- I have an '85 Toyota Dolphin and the side plywood around the wheel wells has mostly delaminated. From what I can see while lying under the motorhome, the delamination runs right up to the floor and fore and aft a few feet. I'm guessing that the damage extends further than I can see. Any advice on repairing this? Can I make a butt joint somewhere in the wall with the new plywood after removing the exterior metal, or do I have to go all the way up? What's a good coating for the new wood to stop this from happening again? Any other help/advice would be greatly appreciated! John Quote Link to comment Share on other sites More sharing options...
85mirage Posted May 19, 2009 Share Posted May 19, 2009 (edited) I just replaced plywood "skirts" Mine were rotted all around. Check my shasta demo post and on may12 i added new picts of just that Edited May 19, 2009 by 85mirage Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.