kylendawson Posted October 29, 2018 Share Posted October 29, 2018 I have a 1991 Warrior For those who have undertaken this project: When rebuilding the overhead cab, how did you guys put the fiberglass back together--particularly under the cab. Did you just "glue it directly to the new plywood and then create a new seal where the two pieces of fiberglass meet? Did you reuse the metal bar along the bottom? Also, if there is a good resource or message thread to use, please point me in that direction. Thanks for any help. Quote Link to comment Share on other sites More sharing options...
Ctgriffi Posted October 29, 2018 Share Posted October 29, 2018 Welcome to the club. This is a very common situation, and there's lots of info out there, with many different approaches. Choosing your repair method will be a factor of time/money/tools/experience. Not saying this is "the right way to go!" or anything, but here's what I did, in this over-dramatically-titled thread: Quote Link to comment Share on other sites More sharing options...
kylendawson Posted October 29, 2018 Author Share Posted October 29, 2018 ctgriffi, Coud you resend the link. I don't think it made it came through on your last post. Thanks! Quote Link to comment Share on other sites More sharing options...
ModocMade Posted July 15, 2019 Share Posted July 15, 2019 I just got 87 Dolphin. It has major wood rot. I'm looking for advice on an idea. I thought i could replace the side walls with 3/4" wood instead of the foam/wood paneling. Does anyone thins this would be to heavy for the overhead? Also Plan on using 3/4" for the bed of Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.