Up north mi

Getting close to spring started a new project,replacement of my head gasket in my sunrader it has a 20r motor you can see from the pic.took the head to the parts store to get it milled and pressure tested, I bought new valves and springs, does anybody know what the washers are for? I can't get the pic to load they are from the parts left over from the valve job, they look like shims under the springs. I took all the emissions off and added some of the block off plates. did not have the one on the back of the head ordered from LC what does that block off?

That is a sway bar I had the same thing on my 1979 sunrader. i changed my axle to a 6 lug axle it is a lot of work! You have to get different u bolts I think 3 inch and the plate where the u bolts go though. move the spring perch in about 1 inch you can use the same springs. there is some great pics in the forums that really helped me a lot some of the people here could find them. one of the old members JD or zero showed everything hope this helps a little. ?

Hi there is a 1985 Nissan sunrader for sale in northern Michigan on Craigslist no pics sounds nice I don't now how to post the ad it is in elk rapids mi

Nice pic

I just bought some tire's for my Tacoma 2003 excab 2wd, the stock tires are 205\75r15 I bought 235\75r15 will they fit?they look big.

So do you want to sell the w50 you have in the pics?

Jd where did you get the g54 transmission from? What are you going to put it in?

Hay jd I would love to put a 5 speed in my 1978 Toyota mh so does the splines the same as the original 4speed have you done it?do you have any information the swap?

There seems to alot more money on this side of the state.I am a carpenter and we have been working in a place called Hearthside Grove in petoskey it is a luxury motorcoach resort they don't call the motorhomes,this place is crazy!lots start at 100 thousand dollars.one person has over one million dollars in his 1000 square foot bungalow it has a slab floor no basement or call crawl space the have more money in the landscape than my house is worth.again crazy!,on top of that they maybe stay a month or two.

My wife was naked,lucky for me she does not wearing clothes.she is younger than me also buy 14 years.we are planing a trip for a week after labor day can't wait we will end up in Calumet .I think I have most of the bugs worked out of the mh it seems never ending.

We camp at woodland park in town I don't like going down the dirt road,the last time we went down the road l thought the camper was going to fall apart . Paradise is a great place we used to camp off of a two track .the spell check did not work for grand marais !

Drove to lake superior this week end in the upper peninsula to a town called grand marias not much there but a campground,some of the sites are buy the water my wife and I got one of the sites we set up camp Friday . Saturday it rained all day, the weather gets got really bad at night in the pics you can see the leaf and debris was all over the back of the camper. At night the wind was blowing pretty hard and raining hard,we herd a noise from the door l though it was the wind ,it was not ,crazy it was a lady that was drunk and was sitting in the driver's seat my wife got up she was naked and had to bend over to open the door for her, should have locked the door this was 4 o'clock in the morning.it was one of those trips.

I did mine don't know if is to late you have to do what Linda said.i cut mine under the flange half way between the tank a PVC coupler fits great undo the shower drain, that's the only way to get the bolt out of the spring.

That dolphin in the UP was bought from my neighbor for 3000 dollars it needed some work

Sounds great to me,

Hay thanks for the info the head was milled .010 I miss typed it wrong. I want to buy a head gasket for it there's a lot of choices out there LC has a gasket for a stock engine they have different thicknesses would that be for a milled head? The cost for the valves is not to expensive I think I will just buy new . I should do a compression test the motor it has around 87,000 miles on the MH. The head started to leak around the time I put a new exhaust gasket it seems it was coming for one of the studs! So the head has no cam bearings?

Hi all I have a 1979 sunrader I think the head gasket leaks, I read in a post about the same leak Montana chinooks MH. Under the exhaust manifold. I bought a head on creagslist milled .10" no valves or cam should I use the cam bearings in the old cam or buy new? I paid 60 dollars for for the head it seems to be cleaned like sand blasting. How far should I take it new valves and springs I know new seals?from the pics it is hard to see the leak.it would be nice to buy a head from LC but way to much money.does any body have any info on a MLS head gasket they seem to have different thickness?

That is exactly what happens to my tablet, I thought is was the tablet.

With the amount of salt they use up here you have to plan ahead

My tablet does the same can't go through posts

I like hearing about other problems that people have good and interesting things.JD does a great job with his posts and good pics.

Thanks for the info everybody.I will have to look at a little closer that would be nice to have a cruise control.

Yes it does have a cable to the carburetor linkage and one goes down by the trans. It is unhooked I don't see any controls in the cab.

Can any body tell me what this is? 1978 20r surader

What make is it ? do you have any pics