Jump to content

capenteah

Members
  • Posts

    19
  • Joined

  • Last visited

1 Follower

About capenteah

Previous Fields

  • My Toyota Motorhome
    1984 Toyota granville
  • Location
    Virginia

Recent Profile Visitors

630 profile views

capenteah's Achievements

Newbie

Newbie (1/14)

  1. so I don't think that sunlight actually purifies the water the sunlight is used to evaporate the water the clear plastic bottle is used to collect the water in the drain it down bacteria can't be transferred through humidity
  2. Aeromarine six gal kit 348 60 yds 6 oz fabric 380 I was told by the folks over there that that would be more than enough to cover the entire unit
  3. you don't think I'd be able to get it smooth I figured after a couple of coats and some sanding a little bit the filler I should be able to do a pretty good job I mean I've seen people build canoes and their smooth and beautiful why would I not be able to do that ? just being curious not trying to be a smart alec
  4. so a little research in for less than $1000 I can cover the coach with epoxy resin and cloth the entire coach I got a buddy that can get me some paint and I gotta get a bunch of fasteners so figure 1500 total and I can have an entirely new shell why would that be such a bad thing bones can be fixed waiter just takes a little surgery I don't know what it is but I've never been able to buy something and throw it away when its ran its course and go buy another one kinda into fixing up old stuff I went through and replaced the brakes brake hardware wheel cylinders drums bearings seals for the rear axles front axles went ahead and replaced the carburetor with the Weber 32/36 did the plugs wires cap rotor PCV valve fuel filter transmission oil change rear differential oil change motor oil change with ZDDP additive radiator flush and fill thermostat upper lower radiator hose new fan clutch oil pan filter valve cover gasket new KYB monotube gas adjust shocks put a working radio in it new coach battery new grey water and black water blade valves and I'm just getting started by the way I have the stock carburetor air cleaner and a bunch of a missions control items if anybody should need them contact me
  5. absolutely incredible noticeable difference in power but I don't really drive with my foot to the floor so it's got smoother acceleration for the way I Drive I can feel the available power even when I just give it a little gag great investment
  6. guess I should have read it before I posted it I just did a Weber carburetor conversion I have a bunch of emissions control leftovers as well as the carburetor and air cleaner housing I was wondering if anybody might need that stuff sorry for not being clear
  7. that should have said old stock carburetor
  8. just didn't Weber carburetor changeover have the old start car burger that ran when I took it off the air cleaner and a bunch of emissions control stuff for anybody wants it give me a message
  9. Yes waiter I just saw you in Virginia Beach as you know and to let everyone else know I only paid seven hundred and seventy seven dollars for the motorhome 73,000 original miles the sides are pretty rough and roof is terrible I would imagine quite a bit of the framing is rotted out all the problems seem to start at the seems and the bullet proof Sunraders are complete fiberglass shells I was trying to think of a way to make mine a fiberglass shell that wont leak so that I can get many more years of use out of it. besides I got it for so cheap I should be able to put a couple grand and some sweat and make it a - Motorhome that will last the rest of my life and maybe my daughters if I keep up with it
  10. Yes waiter I just saw you in Virginia Beach as you know and to let everyone else know I only paid seven hundred and seventy seven dollars for the motorhome 73,000 original miles the sides are pretty rough and roof is terrible I would imagine quite a bit of the framing is rotted out all the problems seem to start at the seems and the bullet proof Sunraders are complete fiberglass shells I was trying to think of a way to make mine a fiberglass shell so that I can get many more years of use out of it
  11. I have a 1984 Toyota Granville I would like to strip all of the outside sheeting off re frame and attach 1/4inch Luan and then fiberglass the entire shell one piece is there any problem with doing this?
  12. just like Daryl I went with KYb monotube gas adjust best shocks you'll ever put on your toy home
  13. just like Daryl I went with KYb monotube gas adjust best shocks you'll ever put on your toy home
  14. I just literally laughed out loud that's good stuff gotta remember to stay on Gregs good side I probably have to donate or risk getting whacked myself
×
×
  • Create New...