Mister Blu Posted November 23, 2017 Share Posted November 23, 2017 (edited) Hey folks. Been perusing the forums to see if I might glean some answers concerning why my furnace is no longer blowing hot, and how to fix it. Last month it was working fine. Had only first tested it last month. Heat and blower all worked well. Although it could have been hotter. Yesterday I went to turn it on and no heat. Checked fuses. Checked propane supply. What happens: Turn on at thermostat. Turn thermostat all the way up. In approximately ten seconds the blower turns on. Another ten second or so, and I hear a single click. About five to ten seconds later, I hear a softer switching noise. In between these last two, when outside near furnace, i smell propane for two seconds. No other clicks. No heat. Propane smell quickly dissipates. What is the problem here? P.S. Recently replaced the ducting for furnace. Edited November 23, 2017 by Mister Blu Quote Link to comment Share on other sites More sharing options...
Mister Blu Posted November 23, 2017 Author Share Posted November 23, 2017 Is ther some place where we may find replacement parts for these older hydroflames? Quote Link to comment Share on other sites More sharing options...
WME Posted November 23, 2017 Share Posted November 23, 2017 Remove the sparker and clean and check the gap. Sounds like everything is working but that. Quote Link to comment Share on other sites More sharing options...
Guajiro79 Posted November 23, 2017 Share Posted November 23, 2017 I had a similar situation. I tried plugging into shore power and got ignition. Turned out my coach battery was past its prime. Bought and installed a new one and have been good since then. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.