scottperkins Posted October 2, 2009 Share Posted October 2, 2009 I carry a 1/2" bar with a 3/4' socket on it, in addition to a 3' piece of iron pipe to slip over the handle to gain leverage / mechanical advantage or whatever it is to make it easy to crack those bad boys loose. Steve I dont get it. I have a 1985 New Horizon and for the front I use 13/16" which is a very tight fit and on the rear I use 23mm . What wheels do you use 3/4" socket on? Are you sure ? I thought '88s same as 85's if the rear axle has been changed out. Scott Quote Link to comment Share on other sites More sharing options...
desertrat Posted October 3, 2009 Share Posted October 3, 2009 I dont get it. I have a 1985 New Horizon and for the front I use 13/16" which is a very tight fit and on the rear I use 23mm . What wheels do you use 3/4" socket on? Are you sure ? I thought '88s same as 85's if the rear axle has been changed out. Scott I can't imagine this merited a post by itself, but I guess just a matter of making sure someone out there doesn't gather the wrong tools for the job. Not sure why I said 3/4" socket. It's a 23mm or my SAE 29/32 works too. Happy trails Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.