Jump to content

Range with Oven


twokelleys

Recommended Posts

You did not mention if the pilot is going out, or if the main burner, or both.

Sounds like the thermocoupler is bad. The way it works is you set the knob to pilot and light the pilot. Then when you set the knob to higher temp (call for heat) the pilot gets a higher flame. The higher flame heats the thermocoupler to a higher tempeture, this signals the valve to open and supply gas to the burner. Sometimes the thermocoupler can get crud built up on it and not conduct the heat. Also sometimes taking the thermocoupler loose at the valve and retightning it will help. The thermocoupler produces a small amount of electricity, a very small amount and any decrease can cause a problem.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...