hamkid
-
Posts
379 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Gallery
Everything posted by hamkid
-
yup Energy suspension brand. Have to reuse the sleeves for both control arms. The style is different than the original. I just wanted to be sure before I install it.
-
Sanded and painted frame. Now need to install lower bushing. Is this the correct way?
-
Highly recommend a power drill for sanding.
-
Just burned both out.
-
While I’m waiting on the parts how do I remove the control arm bushings?
-
Top notch mate! (Olde English accent)
-
I don’t know what that means, but it sure does sound good! Are you saying replace it? Because that’s what I’m hearing haha.
-
is the relay rod also called the center link?
-
The side that I circled keeps spinning. Replace?
-
Should I bother with the tie rods and relay rod? How can I test if any need replacing?
-
The tool worked great! Thanks.
-
Removing pitman arm from relay rod. Pitman arm puller keeps slipping off. The tool is too wide. Any suggestions? I’m beating it with a hammer in the mean time.
-
The only type of measurement I took was marking the rod and the inside bolt. Are there any other?
-
Now trying to take off the strut bar. It’s not connected to anything so it keeps spinning. I need to remember when I work on the other side to loosen it before I remove it from the lower arm.
-
The intermediate steering shaft is in the way. If I remove the steering box will that shaft move up? I’m rebuilding the steering box anyways and don’t feel like cutting and doing more labor than necessary.
-
Will this work for the control arm bushings? If I wanted to buy new control arms and the upper arms won’t come out without removing the bushings, how can I remove them without buying a tool?
-
Ok.will do. In the mean time got the upper arm unbolted. Won’t come out because of the bar that bolts on back. Do I have to remove the bushings to get if off? Should I buy another tool to remove the bushings?
-
Cool, thanks. Any suggestions for removing the wheel seal? It’s in there good.
-
Should I go with the performance set?
-
is the stabilizer bar also called the sway bar?
-
gonna go with these shocks. Whadya think?
-
What brand is recommended for the wheel bearings?
-
I’m planning on rebuilding the steering box, steering parts, and rear end suspension. Should I start new threads for each one or leave it all here?
