Jump to content

ss67ls

Members
  • Posts

    5
  • Joined

  • Last visited

About ss67ls

Previous Fields

  • My Toyota Motorhome
    84 Toyota dolphin
  • Location
    mill creek

Profile Information

  • Gender
    Male
  • Interests
    muscle cars,toyota 4x4s and now Toyota rv

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ss67ls's Achievements

Newbie

Newbie (1/14)

  1. so the width is aprox 1 1/2 wider I was thinking if I drill the spring perch on the axle as far out as I can to fit the bolt that goes through the spring I should be able to get I hope 1/2 inch each side then the springs would only be a 1/4 of a inch in on each side that should not affect the spring I hope.the springs bolt up but the tilt towards the inside of rig do you think that would be bad
  2. I am converting my 84 new horizon to ff how do I get past leaf spring mounting distance the ff rearend is inch and a half narrower than my factory springs I can get it to sit on the pins but leafs are not straight.any ideas best way to make it work thanks
  3. any one have any ideas on how to get past the spring perch mounting I have a 84 new horizon with a 5 lug was given a 6 ff it is about inch and a half wider than 84 springs I can get it to sit on the pins but the leaf springs are angled a little.other problem is u bolts and plates.my 4x4 u bolts fit so im hoping rear 4x4 ubolts and perch/shock mount will work.any help appreciated she is torn apart in my driveway thank you
  4. so started putting the 6 lug axle in and its newer so its like a inch and a half wider where leafs mounts .I did get it to sit on the pins the leafs are angled not straight and flat and I am going to try u bolts and plates from a Toyota 4x4 rear end .any ideas on the leaf perches to get then straight.i was thinking of drilling new holes as far out as I can on the diff housing perch.any ideas around this problem
  5. hello just got a 84 dolphin for my family of 4 paid 3500 runs drives a lot of stuff has been replaced and almost everything works no water damage that I could find.i would like it to be safe any recommendations I read something about the rearend it is 5 lug the guy is giving me a complete full float 6 lug that he bought for it cause he read something to.i don't know how much work to put it in or if its worth it.so any opinions or thoughts would be great.i just want a cozy little safe rv for my family last couple times tent camping it rained and I had rv envy LOL.plus I have a Toyota 4x4 and it has been the most reliable go anywhere truck so I hope the rv is to.thank you for any input I appreciate it very much
×
×
  • Create New...