Wondering if anyone else has found the solution here: I've just pulled off my old leaf springs and am ready to replace them with the CS010R springs, but I'm struggling to figure out how to use the old hardware with these new bushings. I ordered the OMESB6 bushing kit with the springs, but the center holes are far too large for the bolts and the kit didn't come with any of the metals sleeves I would've expected. My shackles are in good shape, so I'm hoping to not have to order the OME greasable shackle kit (which might solve the sizing issue on the back of the spring, but would still leave me needing sleeves for the front). I know a few people have installed these kits before (@akwcanoe, @AtlantaCamper, @mpanzar), so I'm wondering what I'm missing....
Bolts seem to be 1/2" and the bushing hole is at 11/16", so as best I can figure, I'm needing some metal sleeves 1/2"ID x 11/16"OD x 2 11/16"L - all my web searches are turning up nothing, and I haven't seen anything from OME that meantions sleeves.