-
Posts
726 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Gallery
Everything posted by sdboltdude
-
I used an 8 inch knife to cut my foam worked great and bed is comfy.
-
in California my 1987 is $79 a year still worth every penny
-
I've been away from site for sometime just got married moved to wife's house finally got sometime to work on some projects Made 4 2x2ft cement slabs to park rv on in back yard Scrapped off old roof caulk and resealed vents and seams replaced old toilet to a dometic 300 (picked up new for $50). Old one would not hold water & fill up tank if I had water in rv.. now time to go camping!!!!
-
http://www.chukchansigold.com/ perfect place to stop for the night free RV parking don't even have to register at front desk just pull in to gravel lot back of parking lot all other hotels $130 ort night
-
I'm going to adjust valves to & will be using a mpg app on phone.. I will report back... Off to Yosemite on Saturday from San Diego going to have four people and food lots of beer firewood & camping gear so might be a little heavy should still get better then my last 13 to 13.5 going 65mph & going to lower speed to sweet spot 55 and see how much that helps
-
Bought new oem fuel injectors from ebay for a 22re"c" engine my brother/mechanic wanted to teach me how replace injectors... all went well till we found out I bought the wrong injectors so took off efi for second time & found the right injectors reinstalled efi & broke off a bolt on the cold start ?injector? tried to drill & use extractor no luck but bolt drilled out and fell into intake so once again had to take efi off to get to bolt... finally got everything back together and RV is running great and new injectors helped out a lot brother asked what did I learn (meaning not to over tighten bolts) I said pay him to do it
-
my engine is running good & I was going to adjust valves for maintenance reasons only & bought gasket kit talking to mechanic & Toyota Nation forum I decided not to do job because engine is running good at 72000 miles and don't want to have any problems after job from bad valve adjustment or just tightening valves to much.... Should I do the job? or leave it alone because its running smooth..... let me know what you guys think..
-
kept my on rear bumper storage area & left it their all year and it started chipping away from sun lucky it was on top of container so no leak... guess I should remove when not using going to buy a 5 gallon so it will be carried on roof or cargo rack....
-
looks good for $$$ 83xxx miles http://sandiego.craigslist.org/csd/rvs/4673059384.html
-
I was messing around with old camera & power it off running lights that had a bad & short connection the + wire broke off solder and fell inside rv.. so I took off kitchen cabinet sub wall to get to running light wires to pigtail & fix No-Go it was the running light that was dead center inside of wall separating bathroom & kitchen..No big deal.. Drilled a hole for new wires & spliced into exciting running lights & got me thinking why not have backup camera & all wires tucked away inside cabinet sub-wall for a neater look outside & not running wires & rca video cable all over the place.. So I went to Fry's and bought a backup 170* camera that is flush mounted with rv came with its own drill bit for easy install $45w/tax to go wireless I bought a fm 2.4gh video transmitter & receiver ( http://www.amazon.com/gp/product/B00DOQAGO2/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1) not blu-tooth fm signal works better//for me// installed transmitter outside of sub-wall for better reception & installed receiver under dash.. works good & better picture than my rca cable... getting ready to paint outside RV so RV skin is rough looking..