with some modification to the area originally designed for a "factory" gen set, i was able to utilize this area to hold my honda eu2000i generator. to make this work required cutting out the steel floor or platform that a factory genset would have been mounted to. then a 26 gauge galvanized "box" was fabricated. the box was inserted into the opening from the bottom up, then attached with self tappers. the metal panel that created a partition to store the shore power cord required cutting out as well to tilt the honda genset into the cavity, because the honda was about an inch wider than the opening, with the partition in place. some steel angle iron was installed to reinforce the installation, i cleaned the inside and applied new paint, caulked where needed. the shore power cord now fits comfortably behind the honda. i now have a very easily accessible storage place to keep the genset. joe from dover