Jump to content

Baseball Dad

Toyota Advanced Member
  • Posts

    33
  • Joined

  • Last visited

Posts posted by Baseball Dad

  1. Anybody have a good set up recipe for solar power ?Please be detailed  from what what size wire ,battery's and how many watts are you storing  ,solar charger controller battery charging regulator ,solar panel, how many watts are your panels and Thank you for taking the time to do this.I've been back and forth on this.

     

     

  2. So in my 87 Dolphin my panel for water,black, gray, clean and Power is kind of off. I charged the battery with a smart charger and after it was done I pressed on the power the panel read 3/4.  I hooked up multi-meter and read 12.3v. Has anybody replaced this panel and where do I get one. Thank you

     

  3. I was just looking at this .I watched the second about the watts it takes on electric stuff.

    I was looking to get a Yeti 400 the first video.Oh I forgot I was going to look at

    Suaoki 100W 18V 12V Solar Panel Charger

     

  4. Today was a nice day to work on the Dolphin.Had my wife and son helping.We took the windows out and inspect resealed three windows.Found  a problem  around one window .It was cut too much around .About half inch all way around.Notice that it was molding around even with Butyl tape.So I resealed it and when it cures (the caulking ) I'm going to unscrew the inside frame and caulk it.I noticed going around twice with the butyl tape was the ticket.and screw it and cut the extra off.Four windows and corners to go.Then start the inside.    It's going to pay off doing it the right way!

    IMG_20160925_115812_hdr.jpg

    IMG_20160925_115753.jpg

    IMG_20160925_130517.jpg

    IMG_20160925_135729.jpg

    IMG_20160925_135718.jpg

    IMG_20160925_150709.jpg

  5. Hey ,I don't know what you did but I hope you took your windows out.Its the right way.If you put caulking around you are just putting a band aid on a problem.Today My wife my son and I did three windows.its soooooooooo easy. Hint go around with butyl tape twice around the window.

  6. used butyl tape but had to double it..I forgot to add the RV repair guy had an extra flap that was broken so asked him if he would sell it to me.He said here.So in the picture there is an extra flap cut out.Its the second picture from the bottom.

     

     

     

     

     

     

  7. So today went and talk to the guys at the RV repair shop and brought them donuts as a thank you .I was looking for the vent for the stove .I brought the old stove sleeve that goes to to the wall to the vent.He said it was to old for the stuff he has.So to bought it and was think make a bigger hole?I thought it would be better to cur the $11.vent.

    IMG_20160924_122900.jpg

    IMG_20160924_113555.jpg

    IMG_20160924_120103.jpg

    IMG_20160924_175113.jpg

    IMG_20160924_130144.jpg

  8. Jaunt ,you are right.I tried the key I had and it did work on the lock he gave me.So change those dead bolt and lock them before you leave even for couple minutes.Just for a piece of mind. The place I went to is Meridian RV Service & Repair -9918 162nd street Ct E  Puyallup, WA .If there's any of you guys around here I would maybe like to meet with you guys .

     

  9. So my son and  I went to a local RV repair and service place by my house .I asked him about the lock I had and what was going on.At first he was like you need to drive it here.He said he doesn't no what kind of lock I had.So I had picture with a tape measure next to the lock on my phone and told him that on the internet they wanted about $150.-$200.He looks at me and said wait and goes to the back.He comes back and said does this look like it ?and my son says that's it.He said here you can have it for free.I shook his hand said thank you with a big cheesy smile and said score in my mind!!!!! He said next time it won't be.So I told my boss the next day and he asked where this place was because he needed his hole roof redone.I'm going to go there tomorrow and bring lunch for them.That's good business right there!!!!!!

  10. the one i started to seal the cargo area is Sikaflex construction sealant.For around the front and back seal I ordered Seal tite Corner tape 1 1/2".let me know what you guys think.Oh I was wondering what glazing seal would you use for the windows?

  11. So I'm taking all the cargo, vents off and resealing them. So the vent on top for the above the stove the metal flapper is broken.It looks like tape with rivets in them .Need one of those.The storage water door the breather tube is broken to the at the door and the white tube inside has slashes in them.Anybody know a good place that I could find parts for these things?ThanksOh the side and roof is next to be resealed.

  12. I just bought a 87 Dolphin .EFI manual .My family travels for my son's baseball games.For two years on rainy we would tough it out . But when I was on FB and seen a add for this yoda.I was like score.Anyways This weekend I'm cleaning caulking  and reapplying  the calking with Sikaflex for now.If we keep it I will get a kit and take the molding off an redo it.Yes it is slow going up hill like my 85 4x4. My toyota club was thinking of a 3.4 swap.Anyways I think I like just the way it is.Thanks for the ADD.

    14184303_10154547353422577_8190489377314942114_n.jpg

    14188325_10154547353837577_7437500800841475872_o.jpg

    14231164_10154547354457577_8996777090389655138_o.jpg

    14225371_10154547353832577_398151987037812723_n.jpg

    14231899_10154547353812577_3658506198878186994_o.jpg

    14233200_10154547354217577_3892013765589519484_n.jpg

    14264111_10154547354212577_31809392730456019_n.jpg

×
×
  • Create New...