who2ted

I carry a 22 mag revolver, loaded, small tire checker, machete, tire iron and duct tape.

What a terriffic job! How about some details, what are they out of, were they easy to install?

It is definetly a wood frame that water has damaged. Looks like the plywood floor of the bunk has a few screws and lots of glue. If anyone has tore into these bunks, I would appreciate some insight into what's under there. Would like to talk to someone before I make more trouble. Thinking about setting a skilsaw shy of the thickness of the plywood and cutting the left side of the flooring out. Thanks for any help! Ken

Thanks Jeff- What do you call the "metal subframe"? Would that be inside the wall corner, vertical, or under the flooring?

The bunk on our 91 Dolphin has settled or failed to the point where the drivers door rubs the bunk. The right side has about one inch clearance and seems to be okay. I can see by looking at the trim and the skirt, that it has shifted on the left side. I placed a jack under the floor, in the corner by the fresh water and gently jacked it up to the point where the door was almost clearing. Now I don't know where or how to fix, shim, or reinforce it to stay up. Was hoping someone who has tore into that corner, or did a rebuild, could tell me about how it is constructed and a possible fix. Thanks All

Thanks, you answered my question. My dial just has gas - elec, no12v on the dial.

How can you tell if fridge is 12v? If you are plugged into 120 and disconnect, does the 12v take over? Wish the fridge had idiot lights!

Was thinking of resealing the exterior of the bunk with Eternabond and possibly replacing the old molding. Has anyone found a molding that works or should I reuse the old molding?

Any reccommendations for covers, for our 22'er? Assuming no one makes a smaller version and would have to adapt something. Kind of like a big oversize suit!

We are buying a dolphin with the couch on one side and a smaller couch type seat on the other side, no booth. I see the floorplan a lot and was wondering what others might use for a table?