Jump to content

Legobusier

Members
  • Posts

    15
  • Joined

  • Last visited

Posts posted by Legobusier

  1. 1 hour ago, linda s said:

    Jinx since it seems your black tank does take the shower water best case is to fix the crack. It can be done even big cracks. ABS is so easy to fix.

    Legobusier I see a past post there you say your waste tanks are polyurethane. If so they could not be original tanks. All Sunrader waste tanks were ABS. Only the fresh water tank is poly. Grey and black should also look about the same size. 11 gallons for black and 12 for grey

    Jinx see if you can post a pic of the crack in your tank. I have posted many times here that the whole side of my black tank broke. I repaired it and it still works perfect like 13 years later

    Linda S

     

    I don’t recall saying my tanks were polyethylene (?).  I’m pretty sure they’re stock, ABS for grey/black and Poly for Fresh…

  2. Mine is the same, 21 foot rear bath/kitchen (1985).  Bathroom toilet, sink and shower all go to black water tank.  The only thing that goes to grey water tank is the kitchen sink (which seems like an awful big tank for just one sink).

     

    I would suspect yours is similar...it's easy to test - open the grey water dump valve and run water down each sink/drain...you should be able to see where it's going pretty easily.

  3. 2 minutes ago, WME said:

    You checked the fan and housing, BUT those are the most common areas of problems. Mice love to build nests there, also the cowl outside air inlet can plug up with leaves and crud.

    Next check and see if the dash control levers are moving the flaps they are connected to the full distance. I had a broken clip on a cable and the control flap was only moving about 1/2 of it's designed travel.

    Remember the AC was designed to cool a pickup cab, not a house. Many owners hang a curtain in the walk through to reduce the space the AC has to cool.

     

    Yes, I will need to double-check all the linkages...I THINK they're all working as designed, and I certainly will do a more thorough inspection of the remainder of the system and evict any resident mice :).

     

    I DO have a heavy vinyl "curtain" to separate the cab from the house, and I'm certain that will help with cooling, but airflow is my major question at the moment.  My uncle had a similar Sunraider and thought this one blew much weaker than his did...hence the question.  I'm just not sure how much of those passageways I can get into without a complete removal of the dash, etc.  I've been in behind the glove box obviously, but will need to dig a bit deeper....

  4. Hi all, 

     

    As many of you know, I just got this '85 Sunraider a few weeks ago and have been busy fixing/tweaking, stuff etc.  Everything more-or-less works now.. :)

     

    Along the lines of "less" working is the cab AC.  It seems to cool ok, and runs through all three fan speeds, but air volume is pretty low out of the vents.  It's not terrible, but seems like it should/could be better.  I've run a borescope into the vents/through the fan housing, etc. and don't see any obvious obstructions, but before I started REALLY taking things apart I was hoping for some feedback....perhaps these things are just that way and don't blow very hard.

     

    One of the issues here is obviously one of measurement...I'm not sure how to measure and/or quantify any improvement really, other than just guessing...

     

    I did "clean" the system using a few cans of this stuff....

     

    https://www.amazon.com/gp/product/B0007PHD0S/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1

     

    I'm not sure if volume increased much/at all, but it does smell minty fresh!  ha...

    Any/all advice appreciated...if these things are just generally weak at blowing that would be good to know.

     

    Thanks guys.

  5. I was able to find a suitable stainless steel flexible tube at a local propane shop.  Fill valve/assembly still works as designed, my issue was simply a bad hose.  Took it back there today for a proper purge and fill....all is back to normal.  Thanks for the help.

  6. Hi all,


    I noticed that the fittings on my propane hose leak, so I need to replace it.  It’s 12” long and has 1/4” flare fittings (female on both ends)…I can’t seem to find one anywhere.  It’s off of an ‘85 Sunraider if that matters.  

    Here’s a photo of the hose, and the fitting it needs to attach to.  Seems like it would be easy to find, but….


    Thanks in advance.

    D861593F-34E5-4510-A3DD-933A58E1B31A.jpeg

    C3E66BFE-9FC9-4211-BE25-58D7E29781F5.jpeg

  7. Hi all, I'm begging to ponder the possibilities of an interior demo/renovation of my '85 21' Sunraider and am trying to figure out what the ceiling/roof construction is/was.  Mine's currently covered in a "jute" type fabric which appears to be original.  I'm trying to determine what's under it and what I can fasten a new ceiling finish to.  (?).

     

    I tried searching this forum, but can't seem to find the answer.  I suspect I'm just missing it.  Thanks in advance.

  8. 37 minutes ago, linda s said:

    Just noticed your dad was a member here. Any chance you know what he used as a screen name or maybe his real name? We get pretty attached to people here. Might be some consolation for you to find out all the friends he had here and maybe read his old posts. 

    Linda S

     

    Hi Linda,

     

    I believe his screen name was “Royal” as was his real name - he went by Roy…I came across a few of his posts earlier.  

     

    As for value, etc. I’m going to buy it from her - she needs the $ and it will help her out with her trasition as well.  Everything works on it, and it runs great…I think the only thing that doesn’t work quite “right” is the AC doesn’t seem to blow much air - I think there’s a cable disconnected or something under the dash if I had to guess.  Fan is running well, but it seems “restricted”. I will dig into in over the next few weeks once I get it up here (I’m in Virginia Beach).

     

    Thanks all for the replies thus far…

     

  9. Hi all,

     

    I’m new here and have a lot to learn.  My father passed away about 2 weeks ago and has/had a pretty nice Sunraider.  I believe he was an active member here.   I don’t really know all THAT much about it/them, but I think it’s a 85 or 86, 21’.  It seems to me that it’s all pretty original, and everything works, heat, AC, nice big fridge, etc…new tires, no leaks in holding tanks, 6 lug rear axle, …..solar panel, etc.  He bought it a few years ago and has been working on it ever since.

     

    What is a “reasonable” market value is for this thing as I may be interested in buying it from his estate (wife).  It seems pretty difficult to nail down values from what I can tell since they’re pretty rare, and most ads I’ve seen are old/outdated.  

     

    Also, what are some things I need to pay particular attention to…Like I said earlier, I know very little about this thing.  I’m pretty mechanically inclined and do a lot of work myself, so I’ll dig in as required.

     

    I’m not trying to get super detailed responses here, but want to know if this thing’s worth $5K or $25K (I suspect it’s in between).

    Thanks in advance.  Located in New Bern, NC.

     

    Thanks all.

    6ED943F2-9528-4E64-A46D-60C77B37F756.jpeg

    725A09A6-3993-4D70-A82C-7F22F19E43C1.jpeg

    A3912607-0D30-40F0-B275-5BED3B7EC63E.jpeg

    E07D5AE0-3275-4046-A88A-CDCF8F72A851.jpeg

    2DE8F677-1AB0-42EE-AF0B-2B4AFAAE1DC1.jpeg

    A7C31092-549A-48AB-989C-06D5C2F7EB86.jpeg

    2833FC74-E086-4598-B863-C0ED7D0D299F.jpeg

    8D7AE3AE-DDFA-4F73-9BB5-508B585DAC09.jpeg

    95EAE208-9949-43B9-8B28-DD3EF9C20899.jpeg

×
×
  • Create New...