loquito

So the previous owner hit the passenger side rear corner, bent the bumper into the body work. The rear corner is in need of tlc but the side lower panel needs attention now. this is the lower panel on the passenger side, the panel sits from the rear wheel to the rear bumper. from underneath it appears to be a sandwich of a fiberglass skin (what you see from the road) then a foam panel and then aluminum panel. On mine the three layers have delaminated. I need to know how I can take off that panel. Can anyone clue me in?

I have a new 60 amp one with the updated fuse panel if your interested. It goes with the old school instructions.

I have replaced the red running lights. Does anybody need some red factory running lights? lowquito@hotmail.com

I may have the bezels from my old lights, I would have to look. email me at lowquito@hotmail.com if you are interested in me going out to check for you. Steven

Hi guys and Ladies I need help again as I cannot find my turn signal flasher and I’m feeling dimwitted. My toy is a 1991. Warrior There are two relays above my cab fuse panel. One is square and the other circular. When these are removed there is NO CHANGE in the turn signals flashing. I removed the kick panel looking for the flasher that I can hear but I still have not found it. I upgraded to LED’s taillight’s and need to get the heavy duty flasher as reg flasher flashes to fast, low resistance sends the reg flasher into burnt out bulb mode and flashes twice as fast. The heavy-duty flasher is supposed to resolve this, thus my search. Can anyone point me in the right direction? My Hayes manual is useless for wiring diagrams! Thanks Steven

Thanks for responding anyway. Happy your toyhouse is getting better:)

Wow what a large, well done project. I commend you. Can you tell me if the running lights screw into a backer?

Hi I am sorry to hear your toyhome needs fixin. I don't have any advice but maybe you can help me? I want to know how the area behind the running lights is assembled. Was there a wood strip that ran acrosss the front that the lights screwed into or did they do it some other way?

Thanks for posting this, I am looking forward to resolving this issue, I love having a project.

Thanks Mike. I will be replacing my lights with the ones from Superbrightleds.com. The scaffold was a good hint too. Well I'll let you know how it goes.

are you saying that you replaced the lights housing and all? Were do the wires start, were is it grounded?

This is on a 1992 Win Warrior. I have 12 little running lights, 5 yellow ones above the over cab window, 5 red ones across the top of the rear of the coach, and 2 red ones down low on each side of the coach in the rear. The 2 in the rear down low work just fine. The 10 up top in the front and rear do not work at all. I changed out all the bulbs but the top 10 still do not work. Can anyone offer any direction on where to start on this problem? Am I missing a fuse? How and were does the wiring run? Please help me light my nights. Home of the eternal dark Steven in Alaska