BarryG

Thks for the info . Have to keep an eye on the aftermarket gas tank. Make sure it doesn't leak.Didn't get rid of my original. Maybe I can blast the inside. I like the drain bolt on the original. To bad the aftermarket doesn't have one.

So far I`ve replaced the fuel pump. I at first made an access hole to pull the fuel pump without having to lower the fuel tank. when I removed it I peered into the tank and did not like what I seen (also it didn`t help much after replacing pump and filter. So I ended up lowering the tank anyways. It was rusted on the inside. I did find a tank online that wasn`t to hard. I also replaced the 3 and a half ft give or take metal tube going to the gas cap ,where you fill it up. That was rusted too. After replacing also a bad spark plug she started right up and purred just great. The part I was having trouble finding was the fan belt pulley / tensioner. We took it out last weekend and when we started to head back we heard a rattle and slight bang under the hood so I pulled over and the pulley came off. It did not seize up. we walked back where it happened and found every part along side the road (wifey found every part...astoinishing) and the belt wasn`t chewed up completely. So I put it all back together and we made it home, about 15miles. Bit I was going to replace the pulley, belt, spacer and all. But had a hard time finding the correct pulley. I put a locknut on and tightened down the tensioner bolt with original pulley which bearings are still ok. Also noticed the bearing can be replaced within the pulley, awsome! PS ...It is definitely an aluminum frame. I`m replacing a section of paneling and seen the frame. I think its a nice little RV. I love it !

Hello , Barry here, Iv`e recently bought a 86 sunland express and love it. Though she is a bit weathered. I`m having trouble finding the exact parts for the motor. They seem to not have a sunland express with a 22re 2.4 L. in their system. What other model vehicle would have the same motor, say for instance a 4runner ?