[1993 winnebago itasca. Plumbing leaking - Pull Ring Valve - Help needed]

This will work, type it into Amazon 

[1993 winnebago itasca. Plumbing leaking - Pull Ring Valve - Help needed]

RecPro RV Plumbing Hardware | 06884 | 1/2" Compression Type 2-Way Elbow Stop Valve | 90-Degree Shutoff Fitting | Pex Pipe/Tubing Fittings (2 Fittings)

[1993 winnebago itasca. Plumbing leaking - Pull Ring Valve - Help needed]

Those are your low point drain valves, type that into Amazon and buy a replacement.

[1985 Toyota dolphin muffler tailpipe]

Just weld a hanger to the frame behind the driver side rear wheel.

[Rear camera]

I have been thinking of installing one, I will be interested in seeing your setup 

[New join dolphin owner and sunrader interior height wanderings]

it would be quite a bit cheaper to convert it to 4x4 than to buy a factory 4x4 Sunrader.

[New join dolphin owner and sunrader interior height wanderings]

Love the picture, I’ve got the same model as yours and love it. Enjoy the adventures.

[Shower rebuild]

6 hours ago, Marianne said:

Hello, all. I have a 1986 Nova Star with the fiberglass shell. If I use FRP, I am creating a second vapor barrier, correct? Does anyone have suggestions for other bathroom wall materisls to avoid moisture and mould growth, especially from condensation inside the wall? Is this even something I should worry about?

No don’t worry about it. 

[list of toyota Micro-mini Motorhomes 1972-1994]

Not sure if this helps. My son lives in Okinawa and is into old Subaru’s. He has bought them from a website named Goonet Exchange, google it. They are very good to deal with and from what I can tell it’s like a Japanese website that caters to dealers putting their inventory on and selling to individuals. The website has many many vehicles and may have something you’re looking for.

[Ceiling Panels]

I didn’t use Luan for the backside instead I put foam board and spray foam. Then FRP over it and screwed that to the studs etc. My goal was weight reduction and movement, these rigs get bounced around the road and from time to time I venture into the northern Maine woods on logging roads etc. 

[Ceiling Panels]

Yes in the same isle as the FRP they should have a few different corners/ transitions that will work

[Ceiling Panels]

I used white plastic FRP sheets, flexible, durable and easy to clean.

[Toyota Warrior Leaning on One Side]

If the rig is only 1” tilted I’d say you’re doing good, old rigs aren’t ever going to be 100%. Buying them is easy now the fun of keeping them on the road starts. 

[Toy Flooring]

Take the carpet or vinyl up and see what you have underneath. If it’s not too bad you can lay a piece of Luan over it and the flooring will be smooth.

[Idaho Doug's Sunrader build]

If I’m understanding this correctly can you add to the opening of the camper to accommodate the 1/4 groove?

[Overcab bed size]

It may cost a bit more but I had a local upholstery shop make ours and it fit perfectly 

[Tire Replacement - General Questions]

We have Thunderer’s on ours, over 15k miles now and very minimal, even wear. I would recommend 

[Window Leak '90 Micro Warrior]

I'm thinking it may be leaking past the glass/frame seal into the frame itself and out one of the screws in the bottom holding it together, running to that bottom corner. If it is the pane/frame seal, how would I go about repairing it or locate parts rather?
   I had this issue as well, the rubber gasket can be replaced, I would add silicone to it before installing, obviously only on the side that is stationary.

[Idaho Doug's Sunrader build]

Your thoroughness is impressive, I did the same type of project on ours a few years ago and should of taken as many pictures as you are, great for reference in the future should a issue arise.

[Are these Toyota RV’s too old to keep?]

Ditto, know as much as possible about the truck, that’s half the fun with these. The other part is just heading out on an adventure. I’ve been 2000 miles from home in some remote places with ours, takes me back when I took off from

home just out of HS in an old truck and found my way up near the arctic circle in AK, man I didn’t know what I didn’t know back then and what an adventure!!

[My 1989 Micro Sprit (Toyota Truck 3.0L 3VZ-E) Throttle body upgrade?]

1 hour ago, ATXBreeze said:

 

I'll come back to one of my original questions re: an Upgrade.  Anyone know if my 3.0L 3VZ-E throttle body can be replaced with another, more modern Toyota throttle body, one that is still actually for sale?

I don’t believe that you will find any of the newer, 2.7, 3.4 or 4.0 will fit. 

[Engine problem(s)? EGR, vacuum hose leak, TPS?]

Its not a EGR, it would be worse than that. I would say something in the fuel delivery system or not getting enough air somewhere. Never heard of a smoke test the way your doing it 😆

[Engine making weird rattle sound]

Any hardware store will have something that works as well. 

[Priority Tire has a Cyber Monday discount.]

I we have a set and have put 15k miles on them so far and am extremely happy with the wear and ride.

[Half spongy brake pedal.]

8 hours ago, mason said:

I haven't been loosing any brake fluid. The container has been full all the time.

Air in the line then