Jump to content

BBC3

Toyota Advanced Member
  • Posts

    74
  • Joined

  • Last visited

Everything posted by BBC3

  1. BBC3

    LED headlights?

    My headlights are quite dim......I want to replace them......would this work? SYLVANIA - 9003 XtraVision - High Performance Halogen Headlight Bulb, High Beam, Low Beam and Fog Replacement Bulb (Contains 2 Bulbs) https://www.amazon.com/SYLVANIA-XtraVision-Performance-Headlight-Replacement/dp/B0012UK3M2/ref=au_as_r?_encoding=UTF8&Make=Toyota%7C76&Model=Pickup%7C230&Year=1993%7C1993&ie=UTF8&n=15684181&newVehicle=1&s=automotive&vehicleId=3&vehicleType=automotive
  2. Hi there, My water smells of sulphur. I've read up a bit and plan to put Hydrogen peroxide in the fresh water tank, and hot water tank and let it sit for a bit and then flush it. I do not drink the water from the RV, and use bottled water. But I do shower in it. Do I need to use a water purification tablet or something like that in the fresh water tank once i have flushed it with the peroxide? As always, any advice, or guidance much appreciated. Cheers!
  3. Tank was full, emptied it. Problem solved......thanks!!
  4. Thanks. As far as I'm concerned this is the best possible solution. I'll be dumping tomorrow and report back!
  5. Thanks, I don't know....The indicator light says half full grey tank, but.....I just heard that these light indicators are not so reliable, and so perhaps it is full. We've hardly used it so hard to see why it would suddenly be blocked.....I'm gonna dump the tanks tomorrow. and see if that is it.....I will report back just fyi. Thanks!
  6. Thanks. I don't have one. I wonder if it is worth renting one? Is that the best way to do it?
  7. Hello! My 1992 Dolphin shower is not draining. In fact when I run the sink in the kitchen the water goes up into the shower tray area, but won't drain away. I put draino in the kitchen sink, for 15 minutes, then flushed it, and all the water seemed to just bbubble up in the shower. Any advice? Thanks!!
  8. Many thanks. I'm getting a great picture now on how to use this fridge most efficiently. Cheers!
  9. Ha! Makes sense, but makes it tricky to use.
  10. Word. Thanks. I will keep that in mind.
  11. Thank you. This is good info. I appreciate you taking the time to share with me. Many thanks!
  12. Yeah, thanks - it's all good learning for me on this site, and i really appreciate you and others being willing to take your time to share knowledge with a beginner like me! Cheers!
  13. Thanks for sharing this info - it is useful to me to get an idea. I appreciate you taking the time to post it. I'm learning plenty here and appreciate it!
  14. Thanks so much for taking the time and sharing this info with me today. It is useful to me. I'm a beginner and so soaking all this up. Yeah, that tiny little light, I was straining my eyes and not sure what I was seeing in the end - Ha! But - after a bit of checking, on the items you suggested, I can tell - the fridge is working!! To be able to operate just on propane is great! I like the idea you speak of with the cooler and I'll probably end up doing that too. Thanks again for taking the time with me. Cheers!
  15. Also, you have any idea how much gas I'd need to run just the fridge each day is i use my Honda 1000 generator?
  16. So, I just lit all the burners on the stove and they all work fine. I then did the fridge and it loooks like it is lit. But, the tiny glass viewing area is small...and the light coming from it is tiny, and I'm not 100% sure it is lit. So, I turned it off and the tiny light disappeared, leaving me thinking that it is lit. I understand it takes 4 - 8 hours to cool down a fridge like this, so I might just leave it and see what happens.......any other way to tell if it is lit?
  17. Hi I have a fridge that can be powered by gas and electric. I have used the electric to power it and it works fine. I can't get the gas lit. I have followed the instructions and see the little spark going off in the tiny window and then it fades and goes out. Any advice gratefully received. Thanks!
  18. Yar, that is a bunch of work.....I'm not sure I'm gonna use the Zep....I just want the grime/grease off, but the bar tenders stuff, it's not that good....and seems like a bunch of elbow grease is the main ingredient. I saw a youtube clip of a guy using a wool pad on a rotating tool, and he was getting oxidization off with it, and so thought about something like that......
  19. Thanks! If it would just stop raining for a minute........
  20. Thanks. I read the thread, and seems mixed opinion. I'm getting the vibe that it would sharpen up a somewhat dulled fiberglass outside, and would not ruin it at least.....might not be the 'best' product, but likely, for my 1991 Dolphin, just the ticket. Thanks. I've ordered the cleanser, and once i get that done and used the Zep, I'll take a photo and post it here. Cheers!
×
×
  • Create New...