-
Posts
338 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Gallery
Posts posted by Iflyfish
-
-
Thanks hunkaman
Do you have the name of the product?
Thanks,
Iflyfishandwaxmeloquent.
-
I am looking at options for finishing the polish job on my 87 Sunrader.
I have Zep and it looks like that is a very time consuming project.
If you use wax, what do you use?
Any other finish?
Thanks
Iflyfish
-
8 hours ago, WME said:
Good luck with matching "White"
Plan B... Forget about matching, try contrast. Dark red, Dove gray, just Black. What color are the original decals?
This is it.
-
-
Pictures out of order but you can see the progress.
-
-
I had one of these on my Winnebago View after blowing an inner rear tire, cost over $300. I found this on Amazon! $120
-
I found the source for a replacement molding! https://www.amazon.com/s?k=rubber+trim+molding&crid=2QHD9QG1P8EWP&sprefix=rubber+trim%2Caps%2C242&ref=nb_sb_ss_i_4_11
-
-
Great input. Thank you. I appreciate this group.
Iflyfishwithdecals
-
Thank you Linda.
I appreciate your thoughts. I have a wheel and have used it successfully.
I am also looking at repainting the old stripes.
Iflyfishwithapaintbrush
-
-
Thanks, I ordered it and will see if it floats my boat! Stay safe and have fun
Iflyfishinmymindinlockdown
-
I need to replace this door stop. Anyone know where to get one? The ones I have seen are larger than this. It is 1" outside diameter and the receptor is 1/2" wide.
I found this one on Amazon but don't know if it would work. https://www.amazon.com/JR-Products-10635-Pivoting-Receiver/dp/B004LF3L8S/ref=pd_sbs_263_1/134-0614890-1730443?_encoding=UTF8&pd_rd_i=B004LF3L8S&pd_rd_r=2c810357-ae7f-4245-96dd-e869850233ca&pd_rd_w=EKuST&pd_rd_wg=IW01u&pf_rd_p=e20a7044-dca9-4b2c-8da8-05b176efe6fb&pf_rd_r=7KW116KQK8BJD24JH8T6&psc=1&refRID=7KW116KQK8BJD24JH8T6
Thanks,
Iflyfishwithdooropen
-
I owned a Winnebago View before my Sunrader. I had to replace my Trojan batteries, about three hundred bucks worth, because they would sulphate over the winter. For about one hundred fifty bucks I installed an Inteli-charger that pulses 14 volts and keeps the batteries from sulphating. I have done the same with my Sunrader.
I also installed a trickle charger to the converter so that my truck engine is charged at the same time as my coach batteries. https://www.amazon.com/Battery-Tender-021-0123-Junior-Charger/dp/B000CITK8S/ref=sr_1_5?crid=IC0UY483KFA0&dchild=1&keywords=trickle+chargers+for+12+volt+batteries&qid=1591146302&sprefix=trickle+charger%2Caps%2C401&sr=8-5
-
Thanks Linda.
-
On 5/31/2020 at 2:38 PM, 91Raider said:
Hello Iflyfish, I have these old lights on mine. What led lights did you get for yours ?
thanks I advance for any help
I posted pics, docs etc in this post. You will find docs to download with all the info you need to replace your tail lights with LED. The only issue is that the bezels may no longer be available on ebay but I have attached a schematic of the bezel so you can make or have made what you need. Look in files to find this topic:
Sunrader tail light replace
By Iflyfish, August 22, 2019 in General Discussion
-
3 hours ago, Maineah said:
There are multiple voltages in a computer 3.3, 5, and 12 volts a standard inverter should charge your computer via its own power supply box or run it for that matter the magic is in the computer. The 19 volts is to keep it with in the 12 volt range despite voltage flucuations.
Thank you!
-
On 5/28/2020 at 10:02 PM, linda s said:
I charge my computer with a 12 volt to 19 volt charger. No laptops actually run on 120. They have converter boxes right in the cord. Less power drain and charges perfectly. Mines old but this is the company
https://www.amazon.com/stores/PWR/PWR/page/DFB16C24-799C-4413-AA6C-AFE5DC167E7A
Converter box on the adapter cord looks exactly the same as the converter box on the factory cord. Just steps up instead of down
Linda S
Thanks Linda. You are such a great resource for info! This is exactly what I was trying to sort out.
-
On 5/28/2020 at 10:02 PM, linda s said:
I charge my computer with a 12 volt to 19 volt charger. No laptops actually run on 120. They have converter boxes right in the cord. Less power drain and charges perfectly. Mines old but this is the company
https://www.amazon.com/stores/PWR/PWR/page/DFB16C24-799C-4413-AA6C-AFE5DC167E7A
Converter box on the adapter cord looks exactly the same as the converter box on the factory cord. Just steps up instead of down
Linda S
Thanks Linda. You are such a great resource for info! This is exactly what I was trying to sort out.
-
On 5/28/2020 at 8:20 PM, WME said:
^^ What he said about pure sine
Thanks WME! You consistently provide great info and feeldback.
-
On 5/28/2020 at 6:33 PM, Royal said:
Hey iflyfish, I bought a 1000watt continuous 2000watt peak to run my 500watt microwave 2 days ago. Took it back yesterday when it would not run it. Turns out that the one I got was a modified sine wave output instead of a "pure sine wave" (which are a lot more expensive). You might want to research the modified/pure differences before purchase. I don't think that anybody makes 500watt microwaves any longer.
As an aside, for 15 years, my wife and I owned and operated a fly fishing camp in Roscoe, NY. (Trout, of course)
Thanks Royal, very helpful post. Sounds like a great place to have and to fish!
-
I'm looking for a portable converter 12v to 110. We have computers to charge when we are offline.
https://www.amazon.com/s?k=BESTEK+400W%2F500W+Car+Power+Inverter+DC+12V+to+AC+110V&ref=nb_sb_noss
I'm looking at this one. They sure have gotten cheaper!
BESTEK 400W/500W Car Power Inverter DC 12V to AC 110V
Ideas, experiences? Thanks
Iflyfishfullycharged
-
What do you use to finish your fiberglass Zep/Wax??
in General Discussion
Posted
Found it, thank you and others for the input. Love this group.
Iflyfishwaxingpoetic