cjac
-
Posts
111 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Gallery
Posts posted by cjac
-
-
Need some input on tank replacement. I don't know if this tank is the original tank. My bathroom and kitchen are in the back. I've ran across a person who has a dolphin that has his bathroom in the back and the kitchen is behind the driver seat. I'm assuming that he has 2 tanks. The owner of the dolphin I can have the tanks if I come get them, they are on the rig.
-
Looked in on getting a new EGR valve. At the prices I seen I'm going to wait on that so I cleaned it and had no issues . I don't live in California . I could delete it , but I don't know if it will affect my mpg. I like getting 20 mpg
-
Revamp my fuel lines no difference. Fuel sight glass is half. No difference. Tapped on the Egr a few times idles perfect. Time to clean or replace the Egr.
-
-
Found out my fuel return line has a bolt in it. The generator fuel line is connected to return line at the fuel tank.
-
Thanks I'll check it out
-
-
Your tire says 185r 14. The 14 means a 14 inch rim. Hope this helps
-
My 84 toy won't idle since I came off the interstate. I have noticed that my return line to the tank is leaking out of the hose at the fuel pump. Could the line be plugged? Carburetor bowl sight glass is 3/4 full should be half. Any ideas would be appreciated
-
On 11/30/2021 at 3:58 AM, linda s said:
Wow you've been working on this for a really long time. Awesome that you didn't give up. Looks like you did a beautiful job. It's time to enjoy it
Linda S
Thanks Linda. Had to remember how to put it back together.
-
About ready for a road trip.
-
Made a little progress today on the cabover repair. Last week put a new battery in drained the 3 yr old gas out and added some fresh gas . Poured a little gas in the carb and fired up. Ran like a champ !
-
What mpg where you getting before the rebuild?
-
Finding a toyota 1 Ton FF might take awhile . I had the 5 lug axle unaware of what I had when I bought it. I took me a year or two to find one in my area. I was on Craigslist and Letgo every day. A junkyard listed a toyota box truck with the axle I needed , it was a 4 hr drive to another state but 550 bucks for the axle and all 4 rims . The next day I was their when they opened the gates at 8am . Lol
-
Still no progress on the motorhome. Been working to much . I'm fired ! I do check under the cover to make sure there are no resident's and so far I've been lucky. At this point I'm not happy.
-
Since my last post my rig has been under the cover and no work has been done . On my off days it' been to cold or raining . Now it's tornado season with thunder storms and I have a 4 week shutdown at work at the end of this month . Ugh !
-
Starting to work on the bunk floor . Didn't do anything yesterday . Blood pressure was to high , all day at the doctors office.
-
Have the walls braced . Time to remove the bunk floor. Need to clean it off first. Lol
-
After a weekend trip to Nashville and all day rain on Tuesday back to work.
-
Finally figured this out. Well my wife did. Lol
-
That was easy ! Nice and strong just with one screw . So with that and some wood glue a definite strong hold .
-
Just bought the kreg jig and some screws at Home Depot for 44 bucks. Going to do some practice drilling on some scrap wood first. Thanks for the info
-
Would a corrugated fastener work better than plates and screws ?
-
Naw. Have some metal brackets and screws.
Naw. Have some metal brackets and screws.
Waste tank
in General Discussion
Posted
Ok. Thanks. Here is what I found on Craigslist .