[Yokahama 195/75/14 on a 87 Itasca?]

Derek

I started reading some of the tire posts this morning and there was some discussion as to the 195 rubbing up against each other. Hence the question.

This morning I went out to pick up fan belts (had one squeeling on this trip) and while out I stopped by to get an estimate on the tires. $102 each is not bad but that is before tax and mounting. I took a look at the spacing of the rear tires and there seems to be plenty of space between the two. Keep in mind that in order to go out on the sand, tire pressure is reduced to 7 psi. This was also a question I posed to my tire guy. I used to do this with my landcruiser with no problem but those tires didn't go from 60 psi to 7.

The load range diference is a factor but what is on there now is rated at 1710 same as these.

So far very useful info. Waiting to find out how long it will take them to get them and then will have to make a decision.

Don

[Rubber roof]

I too am considering covering my roof later this summer and am very interested in the experience of others. That said, here is what I've come up with my little research into the subject.

I have been looking at both standard EPDM and Alpha Ply. All the kits I've seen so far list latex based adhesives and are intended to be applied to a porous surface and not over a metal roof. In doing searches, I've found a couple of places that sell adhesive for application on metal. What I've resigned myself too is having to piece together my own "kit" from various sources.

Interested in what other members have gone through.

Don

[Yokahama 195/75/14 on a 87 Itasca?]

I am looking to get a Self Contained Vehicle permit to be able to camp on the beach on the National Seashore on Cape Cod. I've got the vehicle set up and all the required safety gear and the last detail is tires. The minimum specification for 14 inch tire width is 195 in order to pass their inspection. Before I go out and spend a grand on 7 tires (Even the spare has to meet spec) figured I find out what the issues are.

The Yokahama is listed as one of the few options available in a load range D that has a street tread which is important for riding on sand. (Tire Rack)

I used to have a dune permit years ago with my Landcruiser but feel it would be totally worth spending a grand on tires to be able to camp right on the beach. Even if they wear somewhat prematurely.

So what are the issues? Are the 195's that tight?

Appreciate your input on this,

Don

[A Big Thanks To All]

Hey John, are you looking for something specific or only generic rehab pictures. It is still very much a work in progress. Wasn't really thinking much about posting when I started this project, so I took no pictures of the demolition phase. Mainly what I was thinking throughout was that my wife was crazy for picking refurbing an old motorhome as a dream and and that I was likely to be dead before we ever got to hit the road with it.

Took it out this holiday weekend and visited friends who have a seasonal campsite in Maine. The good news is everything worked and the effort with all the small details such as replacing all the screens paid off.

As I get closer to finishing it, I'll dust off the camera and post some pictures.

Don

[A Big Thanks To All]

I've not had a chance yet to post any questions or comments as I've been steadily working on the restoration of my 87 Itasca. This weekend marks the first day out with me and the wife in our new toy.

I did however spend a great deal of time reading many posts new and old on this forum and the information was invaluable in the effort. So for that, many thanks to all that participate on this board.

I really did get into a bit more than I bargained for and wish I had found this forum before purchase but once in, I rolled up the sleeves and dug in. This ended up being a complete strip down of the interior. Walls and ceiling were replaced with panels I fabricated with 1/8" 3 ply luan, along with new sub floor and composite flooring. A new Fridge, stove, sinks and toilet later along with an updated power center and considerable work on re-doing the electrical and plumbing. Re-laminated the cabinets along with gutting them and fabricating new shelves and storage cubbies. Tore out the dinette and replaced it with a folding couch and custom base for storage.

Still have a bit more planned but it is more than functional and so far seems perfect for the two of us.

So again, many thanks,

Back East Don