90micromini
-
Posts
14 -
Joined
-
Last visited
Content Type
Events
Profiles
Forums
Gallery
Posts posted by 90micromini
-
-
The box was done by previous owner , cant help on cost. But if your in the portland area and want to copy it. just holler..........
There are two recievers on each side welded to the frame and the box is capable of sliding on and off. The bumper is bolted to the frame under the recievers. The spare tire is sitting on the bumper and is bolted into the box which is locked. I even carry a white water kayak on top of the box and have had no problem...................works fine.
-
Here hopefully are a couple of pics of my storage box. built by PO. Left side was for generator and right side storage. I use both for storage. love it would not leave home without it.
-
thx for kicking this around I'm still researching myself. another source here in Portland is www.interstatervmetalandsupply.com they also have rubber roof kits and supplies. And very good prices on metal trim of all the right kinds.
-
Has anyone installed a rubber roof kit? Any input is appreciated!
-
John, where do I start looking even to find the main components so I can fiqure out what it is? Has a handle coming off of the steering column with on-off-resume and resembles rostra I found on line. But I have found no main components mostly cause I dont know what I'm looking for............
-
Check the brake fluid level, top it off, also check the parking brake handle to make sure it fully retracts and doesn't turn on the "brake" light.
Broken wire at the brake switch.
Some of these models used magnets on the drive shaft and a sensor to pick up the magnets. They can also get Vehicle speed from the Trucks computer.
This is a fairly common unit, should be able to find diagrams etc on internet.
John Mc
88 DOlphin 4 Auto
-
Ok It's aftermarket, Rostra or something like that. Anyone know how that works?
-
It's factory and its a 1990 V6, thx will check brake fluid
-
If it's factory, you'll want this:-
http://personal.utul.../10cruiseco.pdf
If it's Aftermarket, good luck with Google finding instructions!
-
Good morning cruise control on 90 toy not working . Checked the fuse already. any ideas or just hit the repair shop?
-
I had some that were totally different than those at rv places. Looked up the part number online and found a company in texas that has them for .80 cents apiece!!!! So ordered a few. Internet is a wonderful tool. By the way Im a newbie to the toy using mine to kayak around oregon. Did 30 kayak trips last year and hope to do 30 this year. White water class 2 and 3. Some flat water. thx for input folks.
-
I have a busted side marker lense. Its a 1990 winnabago warrior. Does any one know if these are availible or do I have to buy the whole thing.
-
Has anyone just removed old windows , measured and ordered new windows from a supplier online ? Is it ever that easy ?
Valve stems for duallies
in Engines - Transmissions - Drive Train - Suspension - Chassis - Steering - Exhaust - Tires - Etc.
Posted
I just dont understand the 65lbs max with rubber valve stems. I think thats bull. I have a work van and trailer with tires that require 80lbs of air pressure. all the wheeels have rubber valve stems. Worked fine for over ten years now. Drove van and work trailer from LA to portland up mountains and down mountains. So 65lbs max on rubber valves Bull........................................