workingsurfbum Posted February 26, 2017 Share Posted February 26, 2017 Hey all, I have a 1985 Dolphin with 60,xxx miles that I've owned for a couple years and I put half of that mileage on. This rig has been the most reliable vehicle that I've owned and have driven it coast to coast 6 times. I am an experienced tradesman and I recently endeavored on some minor repairs. Well you can guess what happens next...I have totally gutted this vehicle to find that practically every popsicle stick they put it together with is going to need to be replaced, and I was hoping to elicit some inspiration from stories of recovery from the brink of death, or when it was finally time to put an end to a motorhome's suffering. By the way, it wouldn't ever go to the junkyard, it would be turned into a badass flatbed truck. If anyone has done the latter, have you had any issues registering the MH as a flat bed? Quote Link to comment Share on other sites More sharing options...
RedEmerald Posted February 26, 2017 Share Posted February 26, 2017 For me that's a little weird as my registration says "Toyota Cab/Chassis" on my registration. Doesn't mention what is on the frame at all. I just assumed they were all like that. Maybe I am wrong. Quote Link to comment Share on other sites More sharing options...
jjrbus Posted February 26, 2017 Share Posted February 26, 2017 I am a bit old now and my get up and go got up and went, if I were 10 years younger and had more space I would rebuild it, with some improvements. I have converted a bus to a motorhome and it is very time consuming and expensive. Those multiple trips to the big box stores for misc add up quickly, then the ideas that don't work and have to be ripped out. Good luck Quote Link to comment Share on other sites More sharing options...
Gulfstream Greg Posted February 26, 2017 Share Posted February 26, 2017 Post some pics of what it presently looks like! If you have the interior walls open why not add new studs next to old. Glue and screw the new studs to the old and to the outside (no screws just glue) skin. Re-insulate. You can re-skin the inside with 1/4 inch luan plywood. When installing the luan make paper templates. Glue the luan to the studs. I think the finish staplers do a good job of stapling the luan down. The ends of the staple pierce in opposite directions and leave a small hole. Quote Link to comment Share on other sites More sharing options...
wonderabout Posted February 26, 2017 Share Posted February 26, 2017 Converting to a flat bed may be as simple as going to your local title office and have the name changed, this is done often in the VW world when a beatle is made into a dune buggy. I was going to make a flat bed work truck out of this 85 dolphin, but it is VERY slowly becoming a flat bed toy hauler, but that's a story for another thread when I have more computer time. Quote Link to comment Share on other sites More sharing options...
redskinman Posted February 26, 2017 Share Posted February 26, 2017 19 minutes ago, wonderabout said: Converting to a flat bed may be as simple as going to your local title office and have the name changed, this is done often in the VW world when a beatle is made into a dune buggy. I was going to make a flat bed work truck out of this 85 dolphin, but it is VERY slowly becoming a flat bed toy hauler, but that's a story for another thread when I have more computer time. This build I wanna see! Good luck! Quote Link to comment Share on other sites More sharing options...
workingsurfbum Posted February 27, 2017 Author Share Posted February 27, 2017 Gulfstream Greg, That is exactly what I started doing in the rear of the coach before realizing the extent of the rot...Looks like I'll be doing it throughout. I think that this will live on as a simplified version of what it was. RedEmerald, I have mine registered in Oregon and it currently says "motorhome" I am guessing if any state is lenient on the definition of a "home" it is probably OR. JJRBus, beautiful work, although I am in a bit of a time crunch so I think my masterpiece will have to come later in life. Redskinman, looks like fun!! I will get some pictures up tomorrow for y'all. Quote Link to comment Share on other sites More sharing options...
Gulfstream Greg Posted February 27, 2017 Share Posted February 27, 2017 6 hours ago, workingsurfbum said: Gulfstream Greg, That is exactly what I started doing in the rear of the coach before realizing the extent of the rot...Looks like I'll be doing it throughout. I think that this will live on as a simplified version of what it was. The plus side is that it looks like it has the full floating rear axle. Here in Calif, flatbed Toyota trucks with full floating rear axles are in high demand by landscapers etc, maybe true in other states as well. Even the rear axle is worth something for the guy who wants to convert his bad rear axle Toyota. Something to think about. Maybe you would have a use for a flatbed. Save the appliances if you can and re-purpose them or offer them for re-purpose. Imagine building a small home using the appliances that can be powered by propane! Quote Link to comment Share on other sites More sharing options...
workingsurfbum Posted February 28, 2017 Author Share Posted February 28, 2017 15 hours ago, Gulfstream Greg said: The plus side is that it looks like it has the full floating rear axle. Here in Calif, flatbed Toyota trucks with full floating rear axles are in high demand by landscapers etc, maybe true in other states as well. Even the rear axle is worth something for the guy who wants to convert his bad rear axle Toyota. Something to think about. Maybe you would have a use for a flatbed. Save the appliances if you can and re-purpose them or offer them for re-purpose. Imagine building a small home using the appliances that can be powered by propane! Good point about the axle. I definitely have more use for a motorhome at the moment than I do a flatbed, so I began taking the steps to do a rebuild from the roof down. Quote Link to comment Share on other sites More sharing options...
freebear13 Posted March 26, 2017 Share Posted March 26, 2017 I had just enough energy and focus to rebuild mine. One whole side from frame up. Scope out the pics...now I have to get another bit of time, energy, AND FOCUS to do the interior. Quote Link to comment Share on other sites More sharing options...
vrocrider Posted April 3, 2017 Share Posted April 3, 2017 On 2/26/2017 at 4:59 PM, wonderabout said: Converting to a flat bed may be as simple as going to your local title office and have the name changed, this is done often in the VW world when a beatle is made into a dune buggy. I was going to make a flat bed work truck out of this 85 dolphin, but it is VERY slowly becoming a flat bed toy hauler, but that's a story for another thread when I have more computer time. On 2/26/2017 at 4:59 PM, wonderabout said: Converting to a flat bed may be as simple as going to your local title office and have the name changed, this is done often in the VW world when a beatle is made into a dune buggy. I was going to make a flat bed work truck out of this 85 dolphin, but it is VERY slowly becoming a flat bed toy hauler, but that's a story for another thread when I have more computer time. Would you be interested in selling front facing window frame & inside trim? Trying to fit a 12 1/8" x 59 1/8" x 7/8" hole in 91 Winnebago. Thanks. Quote Link to comment Share on other sites More sharing options...
wonderabout Posted April 5, 2017 Share Posted April 5, 2017 Sorry VROCRIDER, but I put that window to use on the side Quote Link to comment Share on other sites More sharing options...
Krislee Posted January 17, 2021 Share Posted January 17, 2021 I know this conversation is a few years old but I am in a tricky situation and looking at all corners of the internet for help! I have a 1984 Toyota motorhome that suffered water damage but insurance wouldn’t cover it. So now I’m at a crossroads...to rebuild the motorhome from the floor up or tear it all down and make a toy hauler? It would be perfect for my couple of dirt bikes and I know it would sell around here for the same reason. What would you do? Quote Link to comment Share on other sites More sharing options...
Cynxing Posted January 17, 2021 Share Posted January 17, 2021 Hi Krislee, I am in the middle of a renewal project of my Dolphin 86. My vote for you is start the demolition of the junk parts. Even if it becomes a toy hauler you will need to get the wet out. You can decide, when it's dry and sealed, how you want to use it and rebuild it to suit. And if that exhausts you, there are people who would pay for a good working gutted ToyHome. Save them the trouble of the yucky part, ya know? But I suspect that once you get that far you will be excited by the possibilities. Take lots of pictures along the way! My follow up question, which might be yours as well, is it better to work from the top down? Or does it matter if it's all coming out? Quote Link to comment Share on other sites More sharing options...
linda s Posted January 17, 2021 Share Posted January 17, 2021 I don't know how extensive your water damage is but a few years ago there was a toy hauler motorhome combined for sale made out of a damaged Toyota Dolphin motorhome. They kept the overhead sleeping area and a small portion of the living area and the back was all an open flatbed. Just the ticket to get your bikes to where you want to off road and stay comfortably for a couple of days too. Keep the water tank but hook it up to an outside shower so you can get the mud off. Just an idea. Linda S Oops didn't look at the rest of the thread. That is what your already looking at. I think it's a great idea Quote Link to comment Share on other sites More sharing options...
AKPirate Posted April 3, 2022 Share Posted April 3, 2022 Any updates on this build? Do you have some more pics? I am working on something very similar and would love to see more! Quote Link to comment Share on other sites More sharing options...
MMcbirney Posted June 5, 2023 Share Posted June 5, 2023 My 1984 Dolphin just got rear-ended on the freeway, and I'm looking for aluminum panels, a propane tank enclosure, a gray-water tank, and a rear bumper to repair it. Anyone know where I can find those parts and maybe a few others? Quote Link to comment Share on other sites More sharing options...
extech Posted June 5, 2023 Share Posted June 5, 2023 where are you? theres a ebay guy dismantleing one in washington state Quote Link to comment Share on other sites More sharing options...
linda s Posted June 5, 2023 Share Posted June 5, 2023 Link for ebay guy? I can't find it Linda S Quote Link to comment Share on other sites More sharing options...
extech Posted June 5, 2023 Share Posted June 5, 2023 he's selling parts off it. look for toyota pick up parts Quote Link to comment Share on other sites More sharing options...
linda s Posted June 5, 2023 Share Posted June 5, 2023 Can only find a wack job in southern Cal who thinks a wrecked whole 5 lug Dolphin is worth 25,000 dollars. Don't think that's the guy you're talking about. Linda S Quote Link to comment Share on other sites More sharing options...
extech Posted June 5, 2023 Share Posted June 5, 2023 ebay used parts -1984 toyota pickup 1239153. not sure it's a dolphin. he's in spokane Quote Link to comment Share on other sites More sharing options...
linda s Posted June 5, 2023 Share Posted June 5, 2023 OK actual parts for the poster There might be a number on your damaged holding tank. See if you can find it. If not you're going to have to remove it and measure carefully and see if one of these is the right size. Plastic Holding Tanks for RV And Campers - Ronco Plastics (ronco-plastics.com) Your early Dolphin might have a strange set up with a two section combined holding tank, black and grey. You're not going to find anything similar. You have to figure out a way to install 2 tanks and outlets or your going to have all your grey and back mixed. Not the ideal setup. Siding- This is the siding place. Have to figure out the correct profile but they have been doing this a long time. They might know. Warning shipping is going to be expensive Aluminum Siding Patterns – Interstate Metal Fabricators, Inc. (interstatervmetalandsupply.com) Propane compartment. I can't find any right for an RV. It has to be a sealed box to protect the living space. You might need to have one made at a metal shop. Bumper RV Bumper 14 Gauge Steel (recpro.com) This needs cutting to size and welding on. Everything comes to a huge amount of work and a lot of money. Hope whoever hit you had insurance. You might be better off cutting your losses and looking for a new one. Sorry I couldn't give you better news Linda S Quote Link to comment Share on other sites More sharing options...
MMcbirney Posted June 5, 2023 Share Posted June 5, 2023 Thanks, Linda S and Extech! I appreciate the help. I'll look into it... Quote Link to comment Share on other sites More sharing options...
extech Posted June 6, 2023 Share Posted June 6, 2023 if your rig is a 700 i can measure anything you need on mine Quote Link to comment Share on other sites More sharing options...
MMcbirney Posted June 6, 2023 Share Posted June 6, 2023 Thanks! It's a 500? (dinette in the rear). so the left and right sides are basically identical. Hoping I can just copy the good side! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.