Jump to content

Recommended Posts

Posted

Hi All!

My first post and it'll probably be a doozy! :) I've been reading this forum for years but only as a lurker.

So, let me get down to business. I own  a 1988 rear bath Dolphin which has developed a problem which I've searched for the answer to and cannot find, so hopefully someone knows the answer.

Both of the corners on the front of the house have popped out from the moulding. They're out about an inch. These are the uprights behind the cab doors I'm talking about.

Looking at the passenger's side I can see what I think I need to do which is this: remove the house door, replace anything that's rotten, reseat. Correct? As to the driver's side, I'm not sure how to proceed as it isn't as accessible. Also, poking around with a knife in the separation, what is exposed doesn't appear to be rotten. Doesn't mean it isn't, I realize.

When I got this there was a small gap at the top of the driver's side moulding which I've kept caulked but it got larger in a very short period of time. Prior to my getting the Dolphin, it had been stored inside for many years and the area around the overhead bed appears to be solid. Since this happened, I've kept it out of the weather.

Anybody have any idea what I'm up against? Has anyone experienced this?

Thanks for your input! It's really appreciated.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...