Iflyfish Posted August 2, 2022 Share Posted August 2, 2022 I found a leak and need a schematic if someone has one of this area under the sink/stove. Here are pics of the area I need to picture in order to order parts. Fingers crossed here. Water is the enemy! Thanks, Iflyfishdrips Quote Link to comment Share on other sites More sharing options...
Gary_M Posted August 2, 2022 Share Posted August 2, 2022 Pretty common in these rigs, if you start looking for trouble you're gonna find things like this. 😁 Is it currently leaking? The reason I say this maybe the previous owner hooked up city water without a reducer, i.e too much pressure. If it's not leaking on internal pump then leave it alone. Also I doubt you'll find a schematic on this setup, the manuals don't go in that detail. Gary Quote Link to comment Share on other sites More sharing options...
linda s Posted August 2, 2022 Share Posted August 2, 2022 It comes down to you locating the exact source of the leak. No fancy part ordering required unless it's the pump itself leaking. Everything else can be replaced with Pex fittings from the hardware store. Your existing pipe is polybutyl, no longer made. Pex can be joined to it with hose clamps, cheap, or sharkbite fittings, very expensive. Linda S Quote Link to comment Share on other sites More sharing options...
Iflyfish Posted August 2, 2022 Author Share Posted August 2, 2022 6 minutes ago, Gary_M said: Pretty common in these rigs, if you start looking for trouble you're gonna find things like this. 😁 Is it currently leaking? The reason I say this maybe the previous owner hooked up city water without a reducer, i.e too much pressure. If it's not leaking on internal pump then leave it alone. Also I doubt you'll find a schematic on this setup, the manuals don't go in that detail. Gary Thank you Gary for your thoughts. I had no idea one needed a pressure reducer on the water intake! It leaks when I have it hooked up to city water. I have never seen a pressure reducer. Can you share a link to one of these please. I believe a joint may be leaking down there. I don't want the floors to rot because of this so want to do what I can to fix the problem, even if it's from too much pressure. Iflyfishwithdrips Quote Link to comment Share on other sites More sharing options...
Gary_M Posted August 2, 2022 Share Posted August 2, 2022 That's a mistake all of us have made, including me. Campgrounds are especially notorious for high pressure water to accommodate the big rigs, never roll the dice with water pressure . Here is a pic of mine... Gary Quote Link to comment Share on other sites More sharing options...
Iflyfish Posted August 2, 2022 Author Share Posted August 2, 2022 7 minutes ago, linda s said: It comes down to you locating the exact source of the leak. No fancy part ordering required unless it's the pump itself leaking. Everything else can be replaced with Pex fittings from the hardware store. Your existing pipe is polybutyl, no longer made. Pex can be joined to it with hose clamps, cheap, or sharkbite fittings, very expensive. Linda S Again, incredibly useful information from you and Gary! Thank you very much. Having a guy fix this and your input is very helpful. Do you use a pressure reducer when hooked to city water? Any idea where I might find one? Thank you very much Quote Link to comment Share on other sites More sharing options...
Iflyfish Posted August 2, 2022 Author Share Posted August 2, 2022 1 minute ago, Gary_M said: That's a mistake all of us have made, including me. Campgrounds are especially notorious for high pressure water to accommodate the big rigs, never roll the dice with water pressure . Here is a pic of mine... Gary Thank you very much Gary! Do they all come with cats? Iflyfishreduced Quote Link to comment Share on other sites More sharing options...
Gary_M Posted August 2, 2022 Share Posted August 2, 2022 2 minutes ago, Iflyfish said: Thank you very much Gary! Do they all come with cats? I wish...😄 Amazon has them... Quote Link to comment Share on other sites More sharing options...
linda s Posted August 2, 2022 Share Posted August 2, 2022 I never hook to city or campground water. If something springs a leak while I'm away from the camper it's a disaster because it's always on From my fresh tank I only turn pump on when I need water. Might not notice a leak right away but even then, it will still be drops instead of gallons. Linda S Quote Link to comment Share on other sites More sharing options...
Iflyfish Posted August 2, 2022 Author Share Posted August 2, 2022 2 minutes ago, linda s said: I never hook to city or campground water. If something springs a leak while I'm away from the camper it's a disaster because it's always on From my fresh tank I only turn pump on when I need water. Might not notice a leak right away but even then, it will still be drops instead of gallons. Linda S Signs of human intelligence again. Thanks Linda. Iflyfishwithmytoyfriends Quote Link to comment Share on other sites More sharing options...
Gary_M Posted August 2, 2022 Share Posted August 2, 2022 I quit using city water too and only fill the on-board tank and use the pump. My tank is only used for gray water, I carry separate drinking water. What is nice about using the on-board tank is you know how much is going into the waste tanks. I've seen plenty of folks overflow their waste tank at the campground not knowing the volume they put into it, what a disaster! Gary Quote Link to comment Share on other sites More sharing options...
Ctgriffi Posted August 2, 2022 Share Posted August 2, 2022 I always start by turning on the campground spigot slightly and eyeballing the flow, dial it in where I know it's reasonable (~40psi or less). Then I shut it off, hook up my freshwater hose, and turn handle back to same approx. position. Maybe I'm living on the edge... 🤷♂️ Quote Link to comment Share on other sites More sharing options...
extech Posted August 2, 2022 Share Posted August 2, 2022 you sure are. how far open the valve is does not vary the pressure at no flow Quote Link to comment Share on other sites More sharing options...
WME Posted August 2, 2022 Share Posted August 2, 2022 If you are using a pressure reducer, this is useful to take the strain off fittings. https://www.ebay.com/p/673711311?iid=353137715497 Quote Link to comment Share on other sites More sharing options...
Iflyfish Posted August 2, 2022 Author Share Posted August 2, 2022 20 minutes ago, WME said: If you are using a pressure reducer, this is useful to take the strain off fittings. https://www.ebay.com/p/673711311?iid=353137715497 Thank you. Iflyfishwithangles Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.