NDR Posted June 4, 2022 Share Posted June 4, 2022 (edited) Hi everyone! First post on this forum, which has been extremely helpful throughout this project. I bought a 1986 SunLand express last June, and started the remodel in mid January (6 month delay... that's life...) I'll post a log of how it all went, but I'll open by showing the before-and-after photos: Edited June 4, 2022 by NDR add 2 photos Quote Link to comment Share on other sites More sharing options...
Florg27 Posted August 11, 2022 Share Posted August 11, 2022 Hi, I recently got a 85 Sunland express. Mine's going to need a lot of work on the inside and I was wondering if you had a rough estimate on the amount of plywood and wood that you used for the walls and roof? Im trying to get an idea of what all/how much material I will need to get before I start tearing stuff down. Quote Link to comment Share on other sites More sharing options...
Maineah Posted August 16, 2022 Share Posted August 16, 2022 Well it's hard to judge. 1/4" is out there in 4X4 and 4X8 you will have a lot of waste no matter what you do. Just take an overall measurement and go for it you can always go back and get more as needed. Quote Link to comment Share on other sites More sharing options...
extech Posted August 16, 2022 Share Posted August 16, 2022 you will need a table saw. the supports inside are note a standard size. you will need to rip wood to size. practice first if unfamiliar with the saw Quote Link to comment Share on other sites More sharing options...
Maineah Posted August 16, 2022 Share Posted August 16, 2022 Try your very best to get the old pieces out without destroying them you will need them as a pattern. I'll assume it's not your first rodeo it's not exactly and easy project. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.