Jump to content

Recommended Posts

Posted

I would appreciate it if someone on the Forum could tell me who provided the entry door light fixture on the Dolphin or SeaBreeze motor-homes The fixtire had a plastic piece which covered the light bulb at the top of the fixture. The plastic snapped

into the fixture and was  easily broken with age and exposure to the elements. Actually, my fixture is okay and a just want to find a source for the plastic part

Thanks very much 

Jack

Posted
16 hours ago, jb50hb said:

I would appreciate it if someone on the Forum could tell me who provided the entry door light fixture on the Dolphin or SeaBreeze motor-homes The fixtire had a plastic piece which covered the light bulb at the top of the fixture. The plastic snapped

into the fixture and was  easily broken with age and exposure to the elements. Actually, my fixture is okay and a just want to find a source for the plastic part

Thanks very much 

Jack

Hi if yours is the Old Reflect-O-Light door handle you cannot find a replacement lens unfortunately. The ones they sell on eBay or Amazon will Not fit the older unit! Have to fabricate one.

Posted
13 minutes ago, markwilliam1 said:

the Old Reflect-O-Light door handle you cannot find a replacement lens unfortunately

For the porch assist handle grab light fixtures with the screw down lens covers that have no new replacement options, does anyone know of an affordable and available new fixture that I could use as a full replacement?

$80 plus shipping is a bit steep for this kind of thing:  https://www.ebay.com/itm/113770886243

I'll do as markwilliam1 suggested and fabricate one if I can't find a new replacement option.

This is mine in it's current condition:

IMG_20190813_104335.jpg.ba5ba3a3a7ca831960a80929b296a1e8.jpg

Posted

I hate that I'm giving you this advice because I generally don't like to go to RV repair places; they are EXPENSIVE, but in this case...

I had my 1990 Dolphin worked on, and my light fixture/grab handle looks exactly like yours and all I needed was the light lens (not the entire thing).  It's just a cover that snaps on.  The RV place got me one for $12, I don't know where they got it, and then wanted to charge .25 hours to "install it" (pop it in in one second).  I'm sure you can just have them order it for you, so maybe that's an option..?  Just call an RV place nearby?

Posted

AtlantaCamper it is so strange that you have the old style handle. Sunrader starting using the one with no screw in 85 or 86 and I have never seen an old style on anything newer. Is it possible a previous owner replaced it at some time? I know some people have cut a new lens from a milk jug that worked well. 

Linda S

Posted

If I had (and knew how to use) a 3-D printer, I'd set up a cottage industry making the old style covers. :)

"... a new lens from a milk jug that worked well."

Might functionally work well, but still looks like a cut up milk jug. I've seen more pleasing looking results with a trimmed down interior light lens.

Posted
29 minutes ago, linda s said:

so strange that you have the old style handle

Yea, I thought the same thing after reading about the type most others have.  I don't see any indication that it was replaced, but who knows. 

I like your idea of using a milk jug or similar.  I'll cut out a piece of plastic from something like that with a kind-of-similar pre-molded shape and screw it down.

Posted
On 8/13/2019 at 10:48 AM, AtlantaCamper said:

For the porch assist handle grab light fixtures with the screw down lens covers that have no new replacement options, does anyone know of an affordable and available new fixture that I could use as a full replacement?

$80 plus shipping is a bit steep for this kind of thing:  https://www.ebay.com/itm/113770886243

I'll do as markwilliam1 suggested and fabricate one if I can't find a new replacement option.

This is mine in it's current condition:

IMG_20190813_104335.jpg.ba5ba3a3a7ca831960a80929b296a1e8.jpg

I bought the one listed on eBay and installed it on Grannie before I sold her to Ben. Expensive but Very Nice. Uses the snap in lens.

  • 2 years later...
Posted

Reviewing this old posts as I have the same light fixture on my rig. The lense just broke to pieces. I tried making one from a milk carton but have not suceeded. Yet !!

Looking for ideas. Thank you.

Posted

this is one of my favorite hacks ive seen for the light cover:

LightCoverHackSunrader.jpg.6efafe2066ad66e3a53983bd76382120.jpg

Posted

Made a blank plate for mine more than enough light below it.

 

Posted

Thank you all. I ordered the one from Walmart. Thank you Linda. You are the best.

  • 2 years later...
Posted

17175518696011725415295038071723.jpg.4f23483cd69e4ed110f96e599485889d.jpg17175518696011725415295038071723.jpg.4f23483cd69e4ed110f96e599485889d.jpg

On 8/13/2019 at 10:48 AM, AtlantaCamper said:

For the porch assist handle grab light fixtures with the screw down lens covers that have no new replacement options, does anyone know of an affordable and available new fixture that I could use as a full replacement?

$80 plus shipping is a bit steep for this kind of thing:  https://www.ebay.com/itm/113770886243

I'll do as markwilliam1 suggested and fabricate one if I can't find a new replacement option.

This is mine in it's current condition:

IMG_20190813_104335.jpg.ba5ba3a3a7ca831960a80929b296a1e8.jpg

 

Posted

I have one that does not fit my 1992 Dolphin.  This must be for older Dolphin that I bought this from Esty.

 

Mine has a 3 angle curb and shorter. 

 

If you want text me I send it for free. I don't need it 917 2261350

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...