Jump to content

extech

Toyota Advanced Member
  • Posts

    638
  • Joined

  • Last visited

Everything posted by extech

  1. it's not at the main place where they do buis, so make sure you call ahead to arrange for removal. i called and said i was coming the next day. when i got there they hadn't pulled the wheel. they shipped it to me for free instead . if you are familiar with the area they are in, it's south of 50 near hazel
  2. no egr valve on your engine would result in likely melted parts. not a good idea to defeat a needed part
  3. wow. where are you getting your gas? lots of water in there. keeping the tank full will help reduce rusting
  4. the air comes from the blower ,through the ac, then through the heater. it's possible to have both on at the same time. i don't remember if the ac separates from the heater box. i know the cables are a pain. the heat part is in the center, and the ac is next to the blower
  5. i think you need to look at the decal under the hood for year model. this can be listed as a 84 as it may have first sold that year, but it looks like a 83 cab
  6. hi. i have an 84 dolphin too. the truck part is just a toyota p.u. so that bumper will fit although it came with a chrome bumper. what model do you have . mine is a 700- rear bed
  7. it will go out the pass. door. a while back someone was looking for the shelves for that fridg.
  8. as long as when screwed to the locknut the tang is in the groove you're good. yes they are just tapered wheel bearings , same as any other for torque. they need a little load on them unlike ball bearings which will die if preloaded
  9. you should remove the paint from the pads the shoes sit on and be sure to lube them with brake lube
×
×
  • Create New...