Jump to content

extech

Toyota Advanced Member
 View Profile  See their activity

  • Posts

    645

  • Joined

  • Last visited

 Content Type 

Everything posted by extech

  1. extech
    the links werent on the donor ?
  2. extech

    1992 Toyota Dolphin

    extech replied to KC1's topic in Electrical

    check the coach battery, might be dead or disconnected
  3. extech
    behind the handle is a push button. vertical
  4. extech
    you could be overpressurizing the system. a pressure regulator on the hose end will eliminate that as a possibility
  5. extech
    when lighting my fridge, there is no flash when the fire is already lit. maybe wait a while. the water heater takes a long time to get the gas through the pilot. fingers get tired of holding the pilot button i bet the furnace is the same deal. turn it on and off a bunch of times
  6. extech
    anything that needs 120v ac power needs the power from the pole or a generator. the converter (120v ac to 12v dc) uses some energy to do its job, hence the heat. all the 12v stuff always runs off the "boat battery", the converter keeps it charged.' as said, the fridge runs on propane---no electricity needed. the furnace uses 12v from your battery to run the fan
  7. extech
    any glass shop can order your glass in tempered
  8. extech
    you will need to take it to a propane distributor . removing the old valve is not easy, and needs special tools
  9. extech
    just don't put red ones in the front
  10. extech
    p.s. if you need to replace the tank, a regular bbq tank won't work. it must be for horizontal use
  11. extech
    are you turning the nut clockwise? it is left hand thread
  12. extech
    i think as long as it is oozing out it isn't dry. don't worry about it
  13. extech
    yep he's on some other sites i visit
  14. extech
    https://www.amazon.com/Deal】OriGlam-Thread-Cutting-Stainless-Metric/dp/B071H8GP18/ref=sr_1_3?crid=1OV9RC7ZFHTGM&keywords=metric+thread+gauge&qid=1706973045&sprefix=metric+thr%2Caps%2C181&sr=8-3 https://www.amazon.com/sspa/click?ie=UTF8&spc=MTo3Njk5MTQ3NTgwMTM2MDMzOjE3MDY5NzMxMjc6c3BfbXRmOjIwMDEwNzQyODYwMjg5ODo6MDo6&url=%2FGeneral-Tools-177-8-Metric-Thread%2Fdp%2FB0017R1DOM%2Fref%3Dsr_1_19_sspa%3Fcrid%3D253LEUPPWVFD0%26keywords%3Dmetric%2Bthread%2Bchaser%2Bset%26qid%3D1706973127%26sprefix%3Dmetric%2Bthread%2B%2Caps%2C160%26sr%3D8-19-spons%26sp_csd%3Dd2lkZ2V0TmFtZT1zcF9tdGY%26psc%3D1
  15. extech
    try to find a metric thread pitch gauge. should not be expensive. then get a thread file. i have 2 and each one has 8 different files
  16. extech
    don't see it as much different from frp
  17. extech
    i believe can't remember left twist is for rotating hook machines and right twist is for oscillating shuttle if you use the wrong one often times the thread will get frayed and tangle your new machine should have a manual specifying thread type.
  18. extech
    there could be another catch. have you found what thread your machine needs- left or right twist. can you get a welt foot? makes it so much easier
  19. extech
    i would like to suggest you make the stiches longer (less stitch per inch) . what i see is an easily ripped seam on vinyl and leather
  20. extech
    so a swap to a 5 speed would work for you
  21. extech
    so at your thermostat there is a yellow and a blue wire
  22. extech
    if it is the thermostat on the left, it shows it as a simple switch and it is in the always on position. i think the t stat part only works the ac
  23. extech
    can't read the diagram, does the yellow wire go to the thermostat?
  24. extech
    the factory ready made socket has a lead going to the return
  25. extech
    obviously the diagram isn't showing everything. since it is an add on i would be looking at the wiring where the heat strip is. someone grounded the return
×
×
  • Create New...