docweathers Posted April 29, 2015 Share Posted April 29, 2015 The bottom shower pan and the seams in the shower walls are shaking apart. The screws are vibrating out of the pan. What can I replace them with that will stay in. I tried putting white duct tape along the shower wall seams and it just fatigued in the corners. Are there other tapes of patching techniques that will work better? Thanks Larry Quote Link to comment Share on other sites More sharing options...
Ctgriffi Posted May 4, 2015 Share Posted May 4, 2015 I've had problems with gaps between the shower walls and the pan too; the back wall of the shower (next to bumper) is the most affected on mine—almost looks like the rear body of the camper is slowly pulling away from the rest. I've had some success with running a good bead of caulk along the widening seam and then covering it with this sealer trim product. I'm not sure how permanent it will be, but it looks pretty decent, if you take your time. (Make sure the shower is very clean and dry before attempting for best adhesion.) Quote Link to comment Share on other sites More sharing options...
Gulfstream Greg Posted May 27, 2015 Share Posted May 27, 2015 Try lexel caulk, amazing stuff, comes in clear or white. It is the duct tape of caulks and I will attest to that. http://www.sashco.com/products/lexel/ But you got something else going on, things should not be moving that much. Quote Link to comment Share on other sites More sharing options...
DanAatTheCape Posted May 28, 2015 Share Posted May 28, 2015 If things are moving, you need to address that first. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.