keitholivier Posted May 19, 2007 Share Posted May 19, 2007 I have discovered that during a recent storm, some water got into my Dolphin around the mid vent and dripped onto the cushion of the bench seat. I have looked everywhere, but I find no obvious fasteners that allow the bottom cushion to be removed. Are the fasteners hidden under the covers or am I missing something ? I just got my little Dolphin back together after the engine was in 100 piecs on the bench up to last weekend. I am leaving on a trip soon and can't see how the bench seat can be dried out without removing the cushion. Please help ! Quote Link to comment Share on other sites More sharing options...
Tom W Posted May 19, 2007 Share Posted May 19, 2007 My is a Winne the couch is a bed also the bottom cushion has 4 nuts the rest of the frame and back rest 4 bolts Quote Link to comment Share on other sites More sharing options...
keitholivier Posted May 21, 2007 Author Share Posted May 21, 2007 Tom: Any clues to the location of the nuts ? Are they accessed underneath (through the small doors below the sofa) or are the accessible above ? I have figured out that the rear cushion can be released from the linkage mechanism. Thanks Keith Quote Link to comment Share on other sites More sharing options...
Tom W Posted May 21, 2007 Share Posted May 21, 2007 I think I've run out of help from what you say yours is different mine has no doors below,Its a typical kind of pull out couch thing pick up on the bottom cushion and pull underneath is the water tank pump and some wire. Tom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.