TheGrayOutdoors Posted May 31, 2018 Share Posted May 31, 2018 Hi folks, We’ve been missing our driver’s side rear slider window screen frame since I bought the rv. Now summer cometh and it’s hot without air conditioning. Need maximum ventilation! I remember there being some information on how to remake these screen frames with a kit, but I just can’t find it. Could you help me out please? thanks, rob Quote Link to comment Share on other sites More sharing options...
linda s Posted May 31, 2018 Share Posted May 31, 2018 Window screen parts. You put them together the same as you would for a home window screen. The big difference is you need the radius corners at least on one side and no I don't know which ones are the right radius. oh and you need screen clips so they won't rattle. Buy the screen material at your local hardware store. https://www.pellandent.com/RV-Window-Screen-Parts Linda S Quote Link to comment Share on other sites More sharing options...
TheGrayOutdoors Posted May 31, 2018 Author Share Posted May 31, 2018 Thank you!! Quote Link to comment Share on other sites More sharing options...
Caribemj Posted July 5, 2019 Share Posted July 5, 2019 On 5/31/2018 at 7:12 AM, linda s said: Window screen parts. You put them together the same as you would for a home window screen. The big difference is you need the radius corners at least on one side and no I don't know which ones are the right radius. oh and you need screen clips so they won't rattle. Buy the screen material at your local hardware store. https://www.pellandent.com/RV-Window-Screen-Parts Linda S I looked at the parts but still can’t figure out how to get the screens OUT! Suggestions welcome! Quote Link to comment Share on other sites More sharing options...
linda s Posted July 6, 2019 Share Posted July 6, 2019 Mine have the pressure spring on the bottom. I have to stick a skinny screw driver in there while pushing the screen sideways to get it loose. Something like this Or this Holding your screen in place. Sorry about big pics Linda S Quote Link to comment Share on other sites More sharing options...
BobBeery Posted July 6, 2019 Share Posted July 6, 2019 I always wanted to know this so I could take a screen in to a shop and get new screen fabric installed. Thanks to Linda, I was just able to go pop out two of my screens in seconds. Don't even need a screwdriver. I just slid the screen sideways a bit so that I could grasp the vertical on each end, then lifted straight up compressing the spring which is in the top . The bottom cleared the track by almost a sixteenth of an inch and I just pulled it to me then lowered the screen until the top was also out. But note this: in my Toy the springs are in the top. In Linda's the springs are on the bottom. So if the screen won't lift up try pushing down and see if it moves at the top first. If neither way works, get a little screwdriver and try what Linda does. Quote Link to comment Share on other sites More sharing options...
Caribemj Posted July 6, 2019 Share Posted July 6, 2019 3 hours ago, linda s said: Mine have the pressure spring on the bottom. I have to stick a skinny screw driver in there while pushing the screen sideways to get it loose. Something like this Or this Holding your screen in place. Sorry about big pics Linda S Thank you! I’ve gotten the table out so it will hopefully be easier to really look harder. What a crazy system. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.