Jump to content

LED running light compatibility


pine_cone_express

Recommended Posts

Hi, I'm wanting to upgrade all of the exterior running lights to led. I have a 1990 Winnebago Warrior. I'd like a solution that involves zero modification ie. uses same mounting holes. Any suggestions? I'm looking at these

Thanks in advance!

Link to comment
Share on other sites

Nice looking lights pine. Dont know if the holes will be the same or not. I replaced all my running lights with 2 bulb incandescents last year. I had to drill 1 hole for each fixture as they didn't line up. Some rigs don't give you much extra wire behind the old lights so rewiring can be difficult. My suggestion is to completely seal the holes where the wires come out and the screw holes with butyl tape. Very important to prevent future leaks! The price for leds seems to be coming down. I couldn't afford them last year. Good Luck!

Link to comment
Share on other sites

I have a 92 warrior, replaced all clearance lights with incandescent because led's were 3x as much money. but, I found a website for led's, I believe it is LEDLIGHTS.COM, and their led clearance lights were under $5.00 each. good luck. joe from dover.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...