Winnie the warrior
-
Posts
23 -
Joined
-
Last visited
About Winnie the warrior
Winnie the warrior's Achievements
Newbie (1/14)
-
Im having no luck finding a replacement screen door slide for my 90 Toy Warrior. Its an odd size 10x21.5. Can only find 9" or 12" high, not shaped to cut down, any ideas?
-
Katatat, my advice would be to tear into it. I'm not on expert by any means, but if you Cut into the bad spot you will see how far you have to go. Send a picture, I may have an idea.
-
Thank you and good luck.
-
Tadaaaaa well I finally got it! Thanks to this diagram, sat down with my retired farmer neighbor who made me realize these were wires (in red) so gathering up courage, looked for something loose. One was pulled out of a connector in a group under the back end and a ground wire going to the Taillight had the wires showing. Fixed both and now everything Works. Thank you everyone for your experience, input and kindness. Thank you again. Now on to the next project...more diamond plate and restore the cab over area.
-
You guys must have lots of time and love to mess with this stuff. My father was the same way, I'd opt to replace the whole dang thing and be done with it.(tail light assembly and flasher) I appreciate your help and support, but if you go to my original post you'll see what I'm up against, had to gut the entire front and rear sections, so fussing with electric parts is not possible because my small motor skills (fingers) are shot from 30 yrs of sports massage. But I will show this to someone who may help me.
-
The #3 little blue fuse with 15A on it. Tested it with a little light up tester, it's good . can't get a reading with this other thing. Photo won't load. Aaarrrgggh
-
Just by chance replaced it with one that lights up if bad yesterday. Nothing.
-
Wow, thank you, my brain is resisting, but I'll persevere.
-
Hahahaha, you made my morning.
-
Guess that post got lost in the air, all the lights brake ,turn signal,dash, inside , gages and radio work. The tail lights with the headlights on all the running lights do not work. The new led front running lights have been wired up and the tail lights are just hanging there waiting to be replace with new Leds. I haven't gotten a test light yet, I'll borrow one today now that it looks possible.?, wish a the nice retired guys around were Willing to help. But they "don't know Toyotas" ? Harbour Freight is over an hour away. Thanks so much
-
How do people even twist around to see these things. Car designers should be required to repair them. Can you send a picture or video, I can't for some reason.
-
Neubie, Good grief, I have absolutely no idea what those words mean. Way over my head. Just occurred to me what if some wire was shorted out when the trim was added. Derek up north... The diagram is great but .....it doesn't translate. . Can you send a photo or video? You are awesome! That makes it look reasonable. Damn, now I have no excuse? Right now only the headlights work, I'll let you know how it goes, thank you so much for holding my hand.
-
This should have helped, I replaced the Taillight control relay,checked all the fuses and switched polarity on one of the lights, but no luck. Every thing works dome, turn signals, brake lights, radio, headlights but still no taillights or running lights.?. The autoparts guy said I had to replace the "flasher relay" because of the new LED lights, but can't find one to replace. So now what's next?!
-
You are awesome! That makes it look reasonable. Damn, now I have no excuse? Right now only the headlights work, I'll let you know how it goes, thank you so much for holding my hand.
-
Looked at it but it's Greek to me.
