Jump to content

cjac

Toyota Advanced Member
  • Posts

    111
  • Joined

  • Last visited

Everything posted by cjac

  1. Ok. Thanks. Here is what I found on Craigslist .
  2. Need some input on tank replacement. I don't know if this tank is the original tank. My bathroom and kitchen are in the back. I've ran across a person who has a dolphin that has his bathroom in the back and the kitchen is behind the driver seat. I'm assuming that he has 2 tanks. The owner of the dolphin I can have the tanks if I come get them, they are on the rig.
  3. Looked in on getting a new EGR valve. At the prices I seen I'm going to wait on that so I cleaned it and had no issues . I don't live in California . I could delete it , but I don't know if it will affect my mpg. I like getting 20 mpg
  4. Revamp my fuel lines no difference. Fuel sight glass is half. No difference. Tapped on the Egr a few times idles perfect. Time to clean or replace the Egr.
  5. Found out my fuel return line has a bolt in it. The generator fuel line is connected to return line at the fuel tank.
  6. My 84 toy won't idle since I came off the interstate. I have noticed that my return line to the tank is leaking out of the hose at the fuel pump. Could the line be plugged? Carburetor bowl sight glass is 3/4 full should be half. Any ideas would be appreciated
  7. Thanks Linda. Had to remember how to put it back together.
  8. About ready for a road trip.
  9. Made a little progress today on the cabover repair. Last week put a new battery in drained the 3 yr old gas out and added some fresh gas . Poured a little gas in the carb and fired up. Ran like a champ !
  10. Finding a toyota 1 Ton FF might take awhile . I had the 5 lug axle unaware of what I had when I bought it. I took me a year or two to find one in my area. I was on Craigslist and Letgo every day. A junkyard listed a toyota box truck with the axle I needed , it was a 4 hr drive to another state but 550 bucks for the axle and all 4 rims . The next day I was their when they opened the gates at 8am . Lol
  11. Still no progress on the motorhome. Been working to much . I'm fired ! I do check under the cover to make sure there are no resident's and so far I've been lucky. At this point I'm not happy.
  12. Since my last post my rig has been under the cover and no work has been done . On my off days it' been to cold or raining . Now it's tornado season with thunder storms and I have a 4 week shutdown at work at the end of this month . Ugh !
  13. Starting to work on the bunk floor . Didn't do anything yesterday . Blood pressure was to high , all day at the doctors office.
  14. Have the walls braced . Time to remove the bunk floor. Need to clean it off first. Lol
  15. After a weekend trip to Nashville and all day rain on Tuesday back to work.
  16. Finally figured this out. Well my wife did. Lol
  17. That was easy ! Nice and strong just with one screw . So with that and some wood glue a definite strong hold .
  18. Just bought the kreg jig and some screws at Home Depot for 44 bucks. Going to do some practice drilling on some scrap wood first. Thanks for the info
  19. Would a corrugated fastener work better than plates and screws ?
  20. Naw. Have some metal brackets and screws.
×
×
  • Create New...